USB Mass Storage Device

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Ok y'all, I am looking on my Device Manager and it has a little yellow thing
over my USB mass storage and it says "This device cannot start. (Code 10)"
any ideas on how to get it to work!?!?
 
Brown_eyez_2003 said:
Ok y'all, I am looking on my Device Manager and it has a little
yellow thing over my USB mass storage and it says "This device cannot
start. (Code 10)" any ideas on how to get it to work!?!?
Click to expand...
You will have to install the driver. If the USB controller is on-board
then the Motherboard disk should have the drivers. If it is an extra
card it should come with the driver CD. If the machine came with the OS
pre-installed, the driver should have been pre-installed too.

Can you tell us a little more about the machine?

Cheers,

Cliff
 
I have an EMachines W2686 with windows xp. i am guessing it was a device that
was already installed. I am not totally sure.
 
Brown_eyez_2003 said:
Ok y'all, I am looking on my Device Manager and it has a little yellow thing
over my USB mass storage and it says "This device cannot start. (Code 10)"
any ideas on how to get it to work!?!?
Click to expand...

Uninstall the device in Device Manager then disconnect it.

Reboot the computer and then reconnect the device.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."
 
Wot Ron Martell said. In addition, you may be asked if you want to allow
the OS to connect to the Internet for a driver. You could give that a
try and see if Microsoft have a driver......

Cheers,

Cliff
 
Back
Top