Hybernate and Printer

[Guest]

I have a new HP1410E PC with a Brother MFC3240C printer. I have activated
the Hybernate feature after 20 min., which works fine. However, when I turn
the PC back on and it comes out of Hybernation the priiter won't work. The
print job remains in the printer window, but under Status it says "Error
Printing". I've tried everything to get it to print but it won't. If I turn
the PC off and restart it, the printer prints the job immediately on it's own.

What is causing this problem and how can I solve it. Thank you.

Tony

 

[Rock]

I have a new HP1410E PC with a Brother MFC3240C printer. I have activated
the Hybernate feature after 20 min., which works fine. However, when I turn
the PC back on and it comes out of Hybernation the priiter won't work. The
print job remains in the printer window, but under Status it says "Error
Printing". I've tried everything to get it to print but it won't. If I turn
the PC off and restart it, the printer prints the job immediately on it's own.

What is causing this problem and how can I solve it. Thank you.

Tony

Just a guess, but check to see if the print spooler service is stopped
after coming out from hibernation. Go to Start | Run | services.msc |
Ok. Scroll to print spooler. Is it started? If not start it. See if
the print now works.

 

[Guest]

I did as you asked, and fourd that the printerwas in fact started and in the
automatic
start up type. So this was not the problem, any other ideas or thoughts?
Thanks

Tony

 

[Rock]

I did as you asked, and fourd that the printerwas in fact started and in the
automatic
start up type. So this was not the problem, any other ideas or thoughts?
Thanks

Tony

:

You mean the print spooler service was started and set for automatic?
If that's the case, no I don't sorry, it was just a guess.