Blue Screen on startup HELP!!

[Ryan]

After the blue bar fills a little over half way on the
Windows 2000 startup splash screen I get a blue screen
with the following error message:

STOP: 0x0000006B(0xC0000102,0x00000002,0x00000000)
PROCESS1_INITIALIZATION_FAILED

I have 2 hard drives and I tried doing a Recovery with the
Recovery Console on the 2000 disc and it lists the 2000
installation as D: but the install is on the C: drive. I
have no idea what else to do. I have no Emergency
Recovery Disc either. Any help is greatly appreciated.

Thanks,
Ryan

 

[Marcos]

Try to go into safe mode and remove what ever software you
just loaded on your PC that could have caused this issue.
This could also happen when you install a new device and
the drivers are conflicting with the operating system.
Marcos

 

[CJD]

If you can get into Safe Mode try uninstalling your
network card/drivers.

 

[Markus]

I have the same Problem on now 3 Pc´s (W2K SP4).
The same occours if I start the Pc in Safe Mode ...

Thanks in advance for any advice

markus