Can't get voice output to work.

[Guest]

I can't get voice output to work for program such as TeamSpeak and Ventrilo.
I have them in the correct ports, I have the lastest drivers. My sound card
is a Sb Audigy 2 ZS. When I try to talk simple nothing happends.

Also, when I try to run the "Test Hardware" Under Controll Panel / Sounds,
Speech, and Audio / Sounds and Audio Devices / Voice tab. I get these errors
after it gets (what I assume to be) done testing.

First one is:
"An error occurred during DirectPlay Voice setup.
The error code is 0x80004005."

Second one is:
"Windows cannot execute DpvSetup.exe, use Add/Remove Programs controll panel
to install."

I did the registry changes that I found in support for the first and it
didn't seem to help. For the second the info in support wasn't even
relevent...

Any heelp would be great! Thanks.

 

[S.Sengupta]

http://support.microsoft.com/?kbid=282882&sd=RMVP
http://support.microsoft.com/default.aspx?scid=kb;en-us;555574&sd=rss&spid=3223

http://www.smartcomputing.com/techsupport/detail.aspx?guid=&ErrorID=22221

regards,
S.Sengupta[MS-MVP]

 

[Guest]

I've already tried all of those...no luck.

Thanks anyway though.

http://support.microsoft.com/?kbid=282882&sd=RMVP
http://support.microsoft.com/default.aspx?scid=kb;en-us;555574&sd=rss&spid=3223

http://www.smartcomputing.com/techsupport/detail.aspx?guid=&ErrorID=22221

regards,
S.Sengupta[MS-MVP]

I can't get voice output to work for program such as TeamSpeak and Ventrilo.
I have them in the correct ports, I have the lastest drivers. My sound card
is a Sb Audigy 2 ZS. When I try to talk simple nothing happends.

Also, when I try to run the "Test Hardware" Under Controll Panel / Sounds,
Speech, and Audio / Sounds and Audio Devices / Voice tab. I get these errors
after it gets (what I assume to be) done testing.

First one is:
"An error occurred during DirectPlay Voice setup.
The error code is 0x80004005."

Second one is:
"Windows cannot execute DpvSetup.exe, use Add/Remove Programs controll panel
to install."

I did the registry changes that I found in support for the first and it
didn't seem to help. For the second the info in support wasn't even
relevent...

Any heelp would be great! Thanks.