yamaha cde-100 cd-r drive

[Guest]

I have a very good scsi cdr made by yamaha! xp pro at first worked well.but
the driver know longer work with sp2 ......this drive is what i need so how
do i fix xp pro sp2 to work ?

ever thanks

 

[Bob I]

Typically requires an upgraded driver from the manufacturer, so check
with Yamaha

 

[R. C. White]

Hi, Terrace.

With SCSI drives, you probably need two sets of drivers: one for your SCSI
host adapter and another for the CDR itself. The CDR driver, of course,
would come from Yamaha. The SCSI drivers would come from Adaptec or whoever
made your HA.

Have you visited the Yamaha or Adaptec(?) website to see if there are any
FAQs or updates following SP2?

RC

 

[Guest]

Yes I have the drivers installed for the scsi card.....Xp supports this
adaptec card
AHA 2930 cu... the cards bios see the cdr (cde 100 yamaha) but it dont show
up in xp (no drive letter and it dont show up in the hardware profiles)

 

[R. C. White]

Hi, Terrace.

My SCSI card is Adaptec's AHA-2930U2, about 5 years old. The only SCSI
device in my computer now is my boot device, and IBM hard drive - a giant
9.1 GB model. ;<) My first several CD-ROMs were NEC SCSIs, but now I have
only two IDE DVDs.

I haven't had to fiddle in the SCSI BIOS in a long time, but it seems I
recall that you can turn individual devices on and off in there. Press
<Ctrl>+A early in the boot process to enter the SCSI BIOS utility (but you
probably knew that).

What does Disk Management (diskmgmt.msc from the Run prompt) tell you about
your Yamaha? Is it listed at all?

RC