XPe USB Image Help For HP Thin Client

G

Guest

I'm looking to deploy my newly built image to an HP T5720 T.C.

I'm not using the HP factory Image because it doesn't run our logon script
correctly.
logon.wsf. doesn't map printers, drives. Started a new image from tap.exe
results and added alot of other components.

Is it possible to use USB drive(s) to boot the thin client and copy the
image over?
What would I boot to? then use what to pull the image?

Or can I boot from a USB drive to PE, or anything for that matter, to pull
an image from a network drive?

I just want the quickest dirtiest way to get from PC to TC, and of course
get the image back for final deployment.

ANY help would be greatly appreciated !!!
 
A

Andy Allred [MS]

I have booted a usb disk on key plugged into the front usb port of the
5720, i don't recall the make and model of the key but the good news is
that the bios supported it.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top