G
Guest
Fiest loaded the driver of the usb into the pc then Installed this pci usb
card. The pc says found a new hard ware and look for the drivers and cannot
find the driver. In the device manager under 'other devices' - there are 2
entries ; 'real time clock' with the qestion mark on it. There is also an
entry in the usb tree which says 'usb enchanced universdal host controller'.
While installing this device, the my graphic card also changes its
resolution, saying that there is not enough resources to run the graphic card
and suggest either disable the graphic card or the usb device.
One of the 'real time clock; uses IRQ 11 which is the same as my graphic
card but there is a red mark in one of the 'memory range' of my graphic card.
The usb pci card has the following chip "vIA VT6212L and a marking on the
card 's-6212B'
My question is does that means this card is not suitable for my pc since
there is a lack of resources, Secondly, how can I resolve this issue soi that
I can usre the usb port. Many thanks for all your help.
card. The pc says found a new hard ware and look for the drivers and cannot
find the driver. In the device manager under 'other devices' - there are 2
entries ; 'real time clock' with the qestion mark on it. There is also an
entry in the usb tree which says 'usb enchanced universdal host controller'.
While installing this device, the my graphic card also changes its
resolution, saying that there is not enough resources to run the graphic card
and suggest either disable the graphic card or the usb device.
One of the 'real time clock; uses IRQ 11 which is the same as my graphic
card but there is a red mark in one of the 'memory range' of my graphic card.
The usb pci card has the following chip "vIA VT6212L and a marking on the
card 's-6212B'
My question is does that means this card is not suitable for my pc since
there is a lack of resources, Secondly, how can I resolve this issue soi that
I can usre the usb port. Many thanks for all your help.