strange networking problem

G

Guest

I have 2 laptops running Vista, I have my wireless router setup and both
computers are connected to the internet fine.
I can see them in the network map but I can not access from any of the two
to the other one, I can not ping any of the two from the other one.
In Vista Networking and Sharing:
1 Network Discovery ON
2 File Sharing ON
3 Public Folder Sharing ON
4 Password Protected OFF
5 Network is “Privateâ€
6 workgroup names are the same "WORKGROUP"

Thanks for any suggestion
 
M

Malke

Giovanni said:
I have 2 laptops running Vista, I have my wireless router setup and both
computers are connected to the internet fine.
I can see them in the network map but I can not access from any of the two
to the other one, I can not ping any of the two from the other one.
In Vista Networking and Sharing:
1 Network Discovery ON
2 File Sharing ON
3 Public Folder Sharing ON
4 Password Protected OFF
5 Network is “Privateâ€
6 workgroup names are the same "WORKGROUP"

Thanks for any suggestion

Firewall misconfiguration?

Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.


Malke
 
G

Guest

Malke said:
Firewall misconfiguration?
Great Malke!
I have configured the firewall in Windows Live One Care and it works. I
completely forgotted about this possibility, I wonder why the changes in the
connections management panel do not change the firewall.
Thanks
 
M

Malke

Giovanni said:
Great Malke!
I have configured the firewall in Windows Live One Care and it works. I
completely forgotted about this possibility, I wonder why the changes in the
connections management panel do not change the firewall.
Thanks

Glad that sorted it for you. Thanks for taking the time to let me know.


Malke
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top