Repair action failed to flush ARP cache

  • Thread starter Thread starter WAW
  • Start date Start date
W

WAW

Hi,
Can anyone tell me what the message in the subject of this post means and
what a likely cause might be? Would a defective NIC be a likely suspect?
Thanks,
Al

All outgoing messages scanned by Norton Anti-virus
 
ARP matches Ethernet addresses to IP addresses for your local subnet. The
error probably means that the cache was already empty when you attempted to
flush it.

This is not a problem in and off itself, it just probably means that you
haven't connected to any other machines. So you probably have connectivity
problems, but they aren't caused by the ARP cache.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Renewing IP Address / Flushing ARP Cache 1
arp cache flush again 1
Flushing ARP cache failed 2
Flushing the ARP cache 3
Flushing the ARP cache 4
Flushing the ARP cache 1
ARP Cache Flush Error 5
Flush/Delete ARP Cache 1

Back
Top