Problem solved: Error Loading the TCP MIB Library

M

Martin Runkel

Hi everybody,

I enountered this problem when installing a new TCP/IP printer and found
that a lot of people also have this error. The solution shown in MS KB
Article Q261302 did not really work.

By using Sysinternals FileMon and comparing against a working W2K server
system I finally found the file which caused the problem (no idea from where
I got it): snmpapi.dll

The non-working version in c:\winnt was 4.0.1381.164 and the filesize was
25KB. After replacing it with the version 5.0.2195.6601 from
c:\winnt\system32 (18K B), I was able to install a new TCP/IP printer
again!!!

I hope, this hint helps all of you with the same problem...


Martin
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

TCP/IP printer problem - TCP Mib Library 1
Error loading the Tcp Mib library. 1
Error Loading the TCP MIB Library" Error When You Add a Standard TCP/IP Printer 1
Error loading the Tcp Mib Library. 1
errr: "Error loading the Tcp Mib Library" on boot up 2
cannot load the tcp mib library 1
Can't configure tcp/ip printer port-Error loading the Tcp Mib Libr 2
Adding a TCP/IP port to the registry via reg.exe (REG ADD) 0

Top