Printed output too light to read

A

Autosketch

I'm wondering is anyone out there has figured out how to
darken the output of AutoSketch 2 to a printer. I have an
Epson Stylus CX5400 and when I send a drawing to it to
print, the print is too light to read. THANKS
 
M

mcanna

Joined
Dec 17, 2005
Messages
1
Reaction score
0
I have been using AutoSketch 2.1 for years now and everytime I have migrated/upgraded or changed anything it has had issues... BUT I have always managed to solve the problem...
I have had the problem with the printing (too light). I think it has something to do with that when AS2 was designed the resolution of printers was in the realm of pen plotters and dot matrix so with inkjet printer having such high resolution nowdays when AS2 instructs print a hairline the printer do exactly that.... I have a HP1220C (A3) printer and the work around was that you set your print quality to Draft. Hope this helps
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

HP1320 Printing too light 4
printing to address labels 1
Laserjet 6L print density adjustment 0
Problem printing red coloured fonts in Excel 1
No able to print on Epson Stylus C43SX 1
Printing 1
Epson Printer Problem 6
Printing problems in publisher 1

Top