NTLDR is missing

  • Thread starter Thread starter Mike C
  • Start date Start date
M

Mike C

I read all about it. Wrong clone with a XP over 98.
What do I do now. I cannot make the disk. I do not know
where the setup disk is correct the problem. Any help
please.
Thanks
M
 
If XP won't start it may be due to a damaged boot sector or a missing or
corrupt ntldr or ntdetect.com files.
To replace damaged ntldr and ntdetect.com you can copy fresh files from the
XP CD using the COPY command. Boot with the XP CD and enter the Recovery
Console (press "R" at first screen and likely just press Enter Key to
provide a blank password)

At the Command Prompt type the following (where "X" is your CD-Rom drive
letter) allowing the files to overwrite the old files
COPY X:\i386\NTLDR C:
COPY X:\i386\NTDETECT.COM C:

To repair a damaged Boot Sector at the command prompt type FIXBOOT and press
Enter. Then answer "Y"
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

NTLDR is missing 4
Clone Windows xp to larger drive (NTLDR missing) 3
NTLDR Missing 2
Ntldr error....help?? 8
Windows XP ntldr missing 12
Xp Start Up Problem 2
NTLDR is missing 9
"NTLDR is missing" 6

Back
Top