New install of WinXP

G

Guest

Recently I had to delete windows after a spyware or virus, we think? When
trying to install it again on the same computer, the program halts when it
begins to install networking components. Could this be that my ethernet is no
longer working and how do I check it? I am not sure if it is a card or a
part of the mother board configuration. I have another network card to use.
If it is on the mother board, can I disable that one and install the new
network card that I have. I have installed and configured hardware before.
 
R

Road Runner

Hey there ....

The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral
hardware
devices, except the monitor, mouse and keyboard, before
installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect
the
EIDE and power cable to it before proceeding, otherwise your
main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the
existing
Windows partitions, then create a new partition, then format the
primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support
website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation difficulties, use the
following resources:

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

Note: If you are unable to activate Windows XP via the internet,
then select the option to "activate by telephone".
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top