networking problem with windows vista

[Jignesh]

i have dsl connection and we 10 guys sharing it through 2gbps speed router of
speedtrack , motorola.
I have get connection some time and some time its automatically disconnecting
my ipconfig/all are as below:
Description: Realtek RTL8101 family pci- E fast Ethernet NDIC 6.0
Physical Address: 00-16-d4-f9-a5-9f
DHCP Enabled: Yes
IPv4 IP: 195.168.1.6
IPv4 Subnet Mask: 255.255.255.0
IPv4 default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.1
IPv4 WINS Server
NetBios Over TCPIP Enabled: Yes
Link local IPv6 Address: fe80:64d8:e400:fc27:92b5%9
IPv6 Default Gateway: -
IPv6 DNS Server: -

at main computer the internet working ok . i have checked at the source end
with conencting my laptop but there also not working. dignosting test showing
DNS server Error.
i have tried everything with mentioned in windows help center.
Any Suggestion /comments are very appreciated

thanks & regards

 

[Robert L. \(MS-MVP\)]

Assuming the IP is 192.168.1.6 (not IPv4 IP: 195.168.1.6), you may want to
disable the IPv6.

Vista IPCONFIG and Network SettingsHow to disable Auto-tuning on Windows
Vista · How to disable TCP/IPv6 · How to remove IPv6 and Tunnel completely
on Vista ...
www.howtonetworking.com/vista/vistaipconfig.htm


Vista incompatible issuesVista Incompatible issues. 1. Some switches or
routers may not compatible with Vista – Solutions: upgrade the firmware,
disable the IPv6, re-configure the ...
www.chicagotech.net/vista/vistacompatible.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com

 

[Jignesh]

thanks for reply
i have disabled ipv6 without uncheking that box in properties. can u tell me
the complete command for disable through command propmt. i chekced but in
that folder there is no disabled files shown.
how to install latest firmware
still its working as i told. sometime local only, limited connectivity but
sometimes automatically connected. the thing i noted is its connected at
arrround 11 pm daily upto morning 8. when i checked in evening its working
but within 5 min it is disconnected.
please reply

thanks & regards

 

[Robert L. \(MS-MVP\)]

This how to may help.

Vista IPCONFIG and Network SettingsHow to remove IPv6 and Tunnel completely
on Vista · How to disable ICS public connection in Vista · How to: Enabling
ICS on Vista ...
www.howtonetworking.com/vista/vistaipconfig.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com