Motherboard Resources Conflicting Device

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Not sure if this has any bearing on my previous message but while viewing the
error log the following message appears, "Input/Output Range 0070-0070 used
by: System CMOS/real time clock", under the Motherboard resources Properties
window . Any advise on how to correct this problem?

Sincere Thanks,

Bryan
 
you might be able
to access the resources to
that driver and select a new
configuration setting.

or

check to see if there is another driver that
is using that specific resources/configuration
and change it to a different one that is free
for use.

You can see conflicting devices easier
if your run msinfo32

then you can modify their configuration
settings if your run devmgmt.msc

- db

ps: you might want to double check your
cmos/bios clock. Sometimes when the
cmos battery begins to run down, then
the cmos timer/clock will not keep accurate
time... (Check your motherboard manual
for accessing your cmos/bios)
Not sure if this has any bearing on my previous message but while viewing the
error log the following message appears, "Input/Output Range 0070-0070 used
by: System CMOS/real time clock", under the Motherboard resources Properties
window . Any advise on how to correct this problem?

Sincere Thanks,

Bryan
 
you're welcome.

- db
I really appreciate your help!! Have a good day!

Bryan
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top