D
Daniel
hi all
i have ADSL (plusnet) shared over a peer 2 peer wireless lan and it works
fine, thing is on the client pc on the network is given ip 192.168.0.51 via
DHCP i want to setup port 4001 on tcp/udp for the client pc, my router/modem
a Voyager 205 has options for NAT virtual server but i cannot figure out
what settings i put in there as the adsl modem is on network ip 192.168.1.1
the settings the voyager modem asks for are
Rule flavor - of which you select Virtual server or DMZ
Rule ID - which i have been told is 54 onwards
Protocal - you are able to specifiy TCP and UDP in there
LAN IP - the IP of the pc you want to access the port i assume
Destination port - port entry box
Local Port - port entry box
the thing is, to the client the adsl is on network 192.168.1.xxx and the
client is on network ip 192.168.0.xxx and i have tried to just enter the ip
of the client as assigned by DHCP of 192.168.0.51 but the program can still
not access the port, what am i doing wrong??
thank you for any replies
Dan
i have ADSL (plusnet) shared over a peer 2 peer wireless lan and it works
fine, thing is on the client pc on the network is given ip 192.168.0.51 via
DHCP i want to setup port 4001 on tcp/udp for the client pc, my router/modem
a Voyager 205 has options for NAT virtual server but i cannot figure out
what settings i put in there as the adsl modem is on network ip 192.168.1.1
the settings the voyager modem asks for are
Rule flavor - of which you select Virtual server or DMZ
Rule ID - which i have been told is 54 onwards
Protocal - you are able to specifiy TCP and UDP in there
LAN IP - the IP of the pc you want to access the port i assume
Destination port - port entry box
Local Port - port entry box
the thing is, to the client the adsl is on network 192.168.1.xxx and the
client is on network ip 192.168.0.xxx and i have tried to just enter the ip
of the client as assigned by DHCP of 192.168.0.51 but the program can still
not access the port, what am i doing wrong??
thank you for any replies
Dan