I need USB Controller please.

[Royston Tin]

Hi,

Recently, I cleaned out my C: drive, reinstalled WinXP Pro, and SP2.
Essentially, all went well, and I am reinstalling my software, which is
also working correctly.

However, in Device Manager, there is a yellow question mark which says
"Universal Serial Bus (USB) Controller". (It has never appeared
previously).

I do want to be able to use my several USB2 devices, and would
appreciate very much your telling me where I can get the driver which
would clear the question mark, and hopefully enable USB2 on my computer.

Many thanks

Rex.

 

[Rick \Nutcase\ Rogers]

Hi Royston,

General USB Troubleshooting in Windows XP
http://support.microsoft.com/?kbid=310575

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Associate Expert - WindowsXP Expert Zone

Windows help - www.rickrogers.org

 

[Richard Urban]

1. Right click on the item in device manager with the yellow mark.
2. Choose "update driver".
3. Mark the area that says "no, not at this time", as the driver you need is
already in your system.
4. Left click "next"
5. Mark "install software automatically"
6. Left click "next"

The system will search for, and find, the appropriate driver for your USB 2
bus device. When done, the device should read as :Standard Enhanced PCI to
USB Host Controller"

You're done!

--
Regards:

Richard Urban


aka Crusty (-: Old B@stard

 

[Royston Tin]

1. Right click on the item in device manager with the yellow mark.
2. Choose "update driver".
3. Mark the area that says "no, not at this time", as the driver you need is
already in your system.
4. Left click "next"
5. Mark "install software automatically"
6. Left click "next"

The system will search for, and find, the appropriate driver for your USB 2
bus device. When done, the device should read as :Standard Enhanced PCI to
USB Host Controller"

You're done!

Richard Urban, many thanks,
Rex.

 

[Richard Urban]

You're welcome!

--
Regards:

Richard Urban

aka Crusty (-: Old B@stard