First Image Boot Fails

[Philipp Stampfl]

Hi there!

I currently try to get an embedded xp image to run on a embedded single
board computer (AAEON PCM-6892) on a 256MB CF Card. I created an image with
TAP ... and Targed Designer and deployed it to my CF card.
When I now reboot, I can see a Windows XP Embedded startscreen but then a
blue screen appears and says: "Process1 initialization failed".
The same thing happens when I boot this image from my normal HD partition.

Is there anything I have missed when I created the image?

Thanks for your help!

Phil

 

[Brad Combs]

Phillip,

Is this a Stop 6b? If so make sure to add the correct file system component
for the file system you are using on your CF and HD. As a test I would add
all the FS components, rebuild, and re-deploy.

HTH,
Brad Combs
Imago Technologies

 

[Philipp Stampfl]

Thanks Brad!

The system now starts right from the CF Card into the First Boot Agent, it
then installs some components and suddenly resets and restarts again. This
seems to be an endless loop.
Does anybody know this problem?

Thanks for your help!

Phil

 

[Brad Combs]

Philipp,

http://www.microsoft.com/windows/embedded/community/tips/xp/reboots.asp

Beware the wrap!

HTH,
Brad Combs
Imago Technologies