Booting from CF problem...

J

jd

Basically, I can install XP Pro on a "consumer grade" CF card in my
target system and have it boot without any problems (no special
treatment at all, just run the XP Pro install disk and it will
properly install on the CF).

I can also create a WES2009 image and boot it OK from a hard drive on
the system.

However, what I would like to do is to boot the WES2009 image from the
CF card but I just can't get it to work. What steps do I need to take?
I even tried to remove the XP Pro install from the CF and copy the
WES2009 image onto the CF card but it still fails to boot (basically
can't find the OS, it seems). What am I missing here?
 
J

JB, DANBIT

you have to use the ufdprep.com tool to boot from your cf card
it is found in your embedded install folder under utilities.

regards
John Bork
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows XP Embedded Cloning - 2 Partitions Display 0
CF boot issue 0
Windows Embedded network boot without W2003 DHCP Server 6
update image on cf-card by usb stick 1
Problems booting copied image from CF card 2
Windows XP Embedded Cloning - 2 Partitions Display 0
Booting from Compact Flash? 7
CF booting problem sbc845000vea 8

Top