Establishing Remote Desktop Connection

[mc]

I run a small business and I double up as the tech guy running the company's
small network. The server is still the old NT4.0, although all workstations
are XP Pro. Internet connection is via a TI, and all computers are on
private IP with the server static and all workstations dynamic. I have
enables the host desktop to accept remote connection. The computer that is
intended to be the remote is a laptop. With the laptop connected locally on
the LAN I can invoke remote desktop from the laptop and sign-on to the host
desktop by specifying the host machine name. The problem I ran into is when
I am truely remote with the laptop connected to the Internet via wireless.

When being asked the computer name to connect to, I think I am supposed to
give it an IP address since we do not have a VPN. But then the only public
IP is the router. What should I enter as the computer name?

Thanks.

 

[nass]

I run a small business and I double up as the tech guy running the company's
small network. The server is still the old NT4.0, although all workstations
are XP Pro. Internet connection is via a TI, and all computers are on
private IP with the server static and all workstations dynamic. I have
enables the host desktop to accept remote connection. The computer that is
intended to be the remote is a laptop. With the laptop connected locally on
the LAN I can invoke remote desktop from the laptop and sign-on to the host
desktop by specifying the host machine name. The problem I ran into is when
I am truely remote with the laptop connected to the Internet via wireless.

When being asked the computer name to connect to, I think I am supposed to
give it an IP address since we do not have a VPN. But then the only public
IP is the router. What should I enter as the computer name?

Thanks.

It is really a mix of software and hardware in your issue, what Security
software are you using on the Old NT4 server?, what your hardware sepcs
(router and can you access the UI for the router and assign the Laptop IP/MAC
address to be trusted, you can use VNC or VPN to connect and be secure on
the remote Connection, especiall you mentioned Wireless, you can easily be
sniffed and monitored and broken into your server (old NT4).
Best if you ask your Question here on the Wireless Networking group, you
will get better advice after providing more info about the Software and
hardware involved:
Wireless Networking Newsgroup:
http://www.microsoft.com/communitie...501-144b-4e8e-baf9-03f78faf7e85&lang=en&cr=US
HTH.
nass

 

[Nepatsfan]

I run a small business and I double up as the tech guy running the company's
small network. The server is still the old NT4.0, although all workstations
are XP Pro. Internet connection is via a TI, and all computers are on
private IP with the server static and all workstations dynamic. I have
enables the host desktop to accept remote connection. The computer that is
intended to be the remote is a laptop. With the laptop connected locally on
the LAN I can invoke remote desktop from the laptop and sign-on to the host
desktop by specifying the host machine name. The problem I ran into is when
I am truely remote with the laptop connected to the Internet via wireless.

When being asked the computer name to connect to, I think I am supposed to
give it an IP address since we do not have a VPN. But then the only public
IP is the router. What should I enter as the computer name?

Thanks.

If you haven't done so already, you might want to post your question to the
Windows XP Working Remotely newsgroup.

There are a couple of factors which will impact your ability to access the host
desktop from a remote location. First, you have to use the public IP address
when initiating the connection. If you've got a static IP address from your ISP,
that's not a big problem.

If your ISP assigns you a dynamic IP address, you might consider using a dynamic
DNS service such as No-IP.com. That way you could enter your chosen address,
something like mycompay.myvnc.com, and it would work even if your ISP changed
your IP address.

https://www.no-ip.com/index.php

Next, you have to configure your router to forward traffic on port 3389 to the
host desktop. Here's a web site with instructions for various routers.

http://www.portforward.com/routers.htm

If you wanted to access multiple computers at your office, you'd change the
default listening port on the machines.

How to change the listening port for Remote Desktop
http://support.microsoft.com/kb/306759

You'd then add configure these additional port numbers to point to the
corresponding computers. When you want to connect, enter your public IP address,
or dynamic DNS, a colon, followed by the port number.

As I noted earlier, you've got a better chance of getting help on the Working
Remotely newsgroup. When you start talking about NT 4.0 servers, T1 lines, and
VPNs, I'm not sure what impact those factors would have on accessing your office
desktops from a remote location.

Good luck

Nepatsfan