Cant run XP on a PC

A

albertleng

Dear all,

I just got a PC from a friend. For some reasons, i need to re-install
the OS. According to him, the PC can only run Win2000. Even so, i
installed XP on a harddisk and tried to run with the PC. The PC will
just boot from the harddisk and will just "hang" there.

The worst thing is i dont have Win2000.

May i know the reasons why the PC cant run WinXp?

How can i solve this?

Thanks.

Albert
 
J

Jupiter Jones [MVP]

Albert;
Did you verify hardware compatibility:
http://www.microsoft.com/windowsxp/pro/upgrading/default.mspx
See the Upgrade Advisor in #3.

Also remove all non essential hardware such as network and sound cards.
If you have integrated video, remove additional video card if applicable.
Disconnect all peripherals such as printer, camera and scanner.

If there are multiple memory sticks, remove them and swap making sure to
stay at or above the 64 MB minimum.
 
R

Ron Martell

albertleng said:
Dear all,

I just got a PC from a friend. For some reasons, i need to re-install
the OS. According to him, the PC can only run Win2000. Even so, i
installed XP on a harddisk and tried to run with the PC. The PC will
just boot from the harddisk and will just "hang" there.

The worst thing is i dont have Win2000.

May i know the reasons why the PC cant run WinXp?

How can i solve this?

If you installed XP onto the disk using a different computer then it
will almost certainly not boot up when you move that hard drive to
your new PC.

What are the basic specs of this computer, such as CPU speed, amount
of RAM, and size of hard drive?

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."
 
A

albertleng

Ron said:
If you installed XP onto the disk using a different computer then it
will almost certainly not boot up when you move that hard drive to
your new PC.

What are the basic specs of this computer, such as CPU speed, amount
of RAM, and size of hard drive?

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

Dear Ron,

R u very sure that > If you installed XP onto the disk using a
different computer then it
will almost certainly not boot up when you move that hard drive to
your new PC.
?

The new PC's CD ROM doesnt work. That's why i have to install into a
HDD using the other PC. I am sure that it's not the CDROM's problem
because i tried several ok CDROM on the new PC, it still doesnt work.
The symptom is always: The CDRom can be detected (seen from BIOS) but
reading a CD on it takes forever.

My new PC's specs are HDD:40GB, RAM:128MB, CPU: Intel 933MHz(cant
remember exactly).

One more question: i have 1 PC which has many PCI peripherals and other
hardware components installed on it. If i take out the original
harddisk from that PC and then, use the PC to install OS into the other
harddisk, will the functionality of all the installed peripherals and
hardwares be affected?
 
R

Rock

albertleng wrote:

Dear Ron,

R u very sure that > If you installed XP onto the disk using a
different computer then it

your new PC.

?

The new PC's CD ROM doesnt work. That's why i have to install into a
HDD using the other PC. I am sure that it's not the CDROM's problem
because i tried several ok CDROM on the new PC, it still doesnt work.
The symptom is always: The CDRom can be detected (seen from BIOS) but
reading a CD on it takes forever.

My new PC's specs are HDD:40GB, RAM:128MB, CPU: Intel 933MHz(cant
remember exactly).

One more question: i have 1 PC which has many PCI peripherals and other
hardware components installed on it. If i take out the original
harddisk from that PC and then, use the PC to install OS into the other
harddisk, will the functionality of all the installed peripherals and
hardwares be affected?

If the two computers are very similar in hardware, then it might, but
more than likely no, a repair install will be needed. A repair install
is not hard.

http://michaelstevenstech.com/XPrepairinstall.htm
 
B

Bruce Chambers

albertleng said:
Dear all,

I just got a PC from a friend. For some reasons, i need to re-install
the OS. According to him, the PC can only run Win2000. Even so, i
installed XP on a harddisk and tried to run with the PC. The PC will
just boot from the harddisk and will just "hang" there.


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore are
*not* transferable to a new motherboard - check yours before starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


The worst thing is i dont have Win2000.

May i know the reasons why the PC cant run WinXp?

About the only reason would be sub-standard or incompatible hardware.
Ask your friend for the specifics.

How can i solve this?

1) Obtain a Win2K installation CD and license

2) Replace the specific hardware components that are not WinXP-compatible.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell
 
R

Ron Martell

The new PC's CD ROM doesnt work. That's why i have to install into a
HDD using the other PC. I am sure that it's not the CDROM's problem
because i tried several ok CDROM on the new PC, it still doesnt work.
The symptom is always: The CDRom can be detected (seen from BIOS) but
reading a CD on it takes forever.

How is the CDROM being connected? The best way is to connect it as
the Master drive on the Secondary IDE Channel. Make sure that the
drive is jumpered as the Master drive and not as Cable Select if you
are having problems. Also try using a different IDE cable - they
have been known to fail.


One further thing you can try. In the article on CD Burning in
Windows XP by the late Alex Nichol MVP at
http://aumha.org/win5/a/xpcd.htm there is a link to download a file
named CDGONE.ZIP. That file contains a registry patch which cleans
out all of the CD drive related entries from the registry. Then when
you reboot the computer the drive will be redetected and the drivers
reinstalled, hopefully this time without problems.

My new PC's specs are HDD:40GB, RAM:128MB, CPU: Intel 933MHz(cant
remember exactly).

128 mb of RAM should allow XP to install and at least "walk very
slowly" if not actually "run". If you are planning on using the
machine to any extent you should seriously consider adding at least
another 256 mb of RAM to it.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top