G
Guest
About two to three times a week my computer will just have a blue screen with
white DOS looking letters. The only thing I can do is turn teh power off to
the CPU and it shuts down right a way. But anyway this is the message that it
displays.
"A Problem has been detected and windows has been shut down to prevent
damage to your computer.
If this is the first time you’ve seen this stop error screen, restart your
computer. If this screen appears again, follow these steps.
Check to be sure you have adequate disk space. Id a driver is identified in
the stop message, disable the driver or check with the manufacture for driver
updates. Try changing video adapters.
Check with you hardware vender for any BIOS updates. Disable BIOS memory
option such as caching or shadowing. If you need to use safe mode to remove
or disable components, restart your computer , Press F8 to select Advanced
Startup options, and then select Safe Mode.
Technical Information
*** STOP: 0x0000008E(0xc0000005, 0xEFCB9742, 0xBAD57B54, 0x00000000)
*** emupia2k.sys – Address EfcB9742 base at EFCAC000, Date Stamp 436359d9
Beginning dump of physical memory
Physical memory dump complete
Contact your system administrator or technical support for further
assistance."
I have knnow idea what this means. I need help. I'm using a Dell 4550, Intel
Pen. 4 2.40Ghz BIOS version A08. Installed memory 1024MB DDR SDRAM. Windows
XP Service pac 2.
white DOS looking letters. The only thing I can do is turn teh power off to
the CPU and it shuts down right a way. But anyway this is the message that it
displays.
"A Problem has been detected and windows has been shut down to prevent
damage to your computer.
If this is the first time you’ve seen this stop error screen, restart your
computer. If this screen appears again, follow these steps.
Check to be sure you have adequate disk space. Id a driver is identified in
the stop message, disable the driver or check with the manufacture for driver
updates. Try changing video adapters.
Check with you hardware vender for any BIOS updates. Disable BIOS memory
option such as caching or shadowing. If you need to use safe mode to remove
or disable components, restart your computer , Press F8 to select Advanced
Startup options, and then select Safe Mode.
Technical Information
*** STOP: 0x0000008E(0xc0000005, 0xEFCB9742, 0xBAD57B54, 0x00000000)
*** emupia2k.sys – Address EfcB9742 base at EFCAC000, Date Stamp 436359d9
Beginning dump of physical memory
Physical memory dump complete
Contact your system administrator or technical support for further
assistance."
I have knnow idea what this means. I need help. I'm using a Dell 4550, Intel
Pen. 4 2.40Ghz BIOS version A08. Installed memory 1024MB DDR SDRAM. Windows
XP Service pac 2.