Application Error!

[Ann]

hi,I've got the following error message:

Logonui.exe ¨CApplication Error

The Exception Illegal Instruction An Attempt

Was made to execute an Illegal Instruction(0xc000001d)

occurred in the application at local 0x01015003



Could anyone give me some hints to fix this error?

Thanks,

Ann

 

[Brad Combs]

Ann,

0x1d = 29 so NET HELPMSG 29 yields "The system cannot write to the specified
device." Is it possible that your hard disk or CF is full, or at very low
capacity? One way to test is to use a hard disk with ample room for the
runtime, re-run FBA after making the partition adjustments in TD, and see if
the error occurs.

HTH,

Brad Combs
Imago Technologies

 

[Ann]

Brad,

I'd like to describe how I get that error message:

1.Run image,connect a PCMCIA ADAPTER(with a CF in it),it's ok.
2.Shut down the computer,disconnect the adapter,connect a slave CF in slave
IDE slot. Run image,Before logon the error message appears.

I used hard disk as primary IDE. If I use CF as primary IDE and redo the
steps,no error message will appear.

Best Regards,

Ann