How Do I Get Detailed Hardware Listing?

J

jim evans

On other newsgroups I see people post hardware configuration listings
like the one below. How is this done? I can't find a place in the
device manager to create such a listing.

[the following is an example I copied from a post. it is not mine.
i'm asking how to create a list like this]

NEC PCI to USB Enhanced Host Controller (B1)
Location: PCI Slot 6 (PCI bus 0, device 14, function 2)
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.0
Driver Date: 6/1/2002
NEC PCI to USB Open Host Controller
Location: PCI Slot 6 (PCI bus 0, device 14, function 0)
Discription: System reserved
Bandwidth: 11%
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
NEC PCI to USB Open Host Controller
Location: PCI Slot 6 (PCI bus 0, device 14, function 1)
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
USB Mass Storage Device
Location: Location 0 (USB Zip 100)
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: USB Mass Storage Device
Power Required: 498 mA
Discription: 2 port(s) available
Power Required: 0 mA
USB Root Hub
Location: 0
Discription: 2 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: 2 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: 5 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
VIA Rev 5 or later USB Universal Host Controller
Location: PCI bus 0, device 4,function 2
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001


jim
 
R

Rick \Nutcase\ Rogers

Hi Jim,

Start/run msinfo32

Or, access system information under start/all programs/accessories/system
tools.

Then expand the branches to reach the category you want. Click in the left
pane, then click edit/select all/edit/copy. Open a post, click in the
message text area and hit ctrl+v to paste the contents.

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone
 
J

jim evans

Thanks for your reply, but that doesn't list the same information as
in my illustration. The example I gave in my OP was for USB -- here's
an example of the same area using your method:

Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_0068&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&12
Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&10
Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&11
USB Root Hub USB\ROOT_HUB\4&36CE346&0
USB Root Hub USB\ROOT_HUB\4&37090E00&0
USB Root Hub USB\ROOT_HUB20\4&B74B78&1

jim
 
J

jakebrake

Try typing "belarc" into your browser and download the free version. It will
tell you everything that is in your computer.
 
F

FrankV

I use it also. It's about the best I've seen. Easy to use and read.

jakebrake said:
Try typing "belarc" into your browser and download the free version. It will
tell you everything that is in your computer.
jim evans said:
On other newsgroups I see people post hardware configuration listings
like the one below. How is this done? I can't find a place in the
device manager to create such a listing.

[the following is an example I copied from a post. it is not mine.
i'm asking how to create a list like this]

NEC PCI to USB Enhanced Host Controller (B1)
Location: PCI Slot 6 (PCI bus 0, device 14, function 2)
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.0
Driver Date: 6/1/2002
NEC PCI to USB Open Host Controller
Location: PCI Slot 6 (PCI bus 0, device 14, function 0)
Discription: System reserved
Bandwidth: 11%
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
NEC PCI to USB Open Host Controller
Location: PCI Slot 6 (PCI bus 0, device 14, function 1)
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
USB Mass Storage Device
Location: Location 0 (USB Zip 100)
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: USB Mass Storage Device
Power Required: 498 mA
Discription: 2 port(s) available
Power Required: 0 mA
USB Root Hub
Location: 0
Discription: 2 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: 2 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001
USB Root Hub
Location: 0
Discription: 5 port(s) available
Power Required: 0 mA
Driver Version: 5.1.2600.1106
Driver Date: 7/1/2001
VIA Rev 5 or later USB Universal Host Controller
Location: PCI bus 0, device 4,function 2
Discription: System reserved
Bandwidth: 10%
Driver Version: 5.1.2600.0
Driver Date: 7/1/2001


jim
Click to expand...
Click to expand...
 
J

Jim Macklin

Look at AIDA32 for the "best" and most complete, Google for
AIDA32



| I use it also. It's about the best I've seen. Easy to use
and read.
|
| | > Try typing "belarc" into your browser and download the
free version. It
| will
| > tell you everything that is in your computer.
| > | > > On other newsgroups I see people post hardware
configuration listings
| > > like the one below. How is this done? I can't find a
place in the
| > > device manager to create such a listing.
| > >
| > > [the following is an example I copied from a post. it
is not mine.
| > > i'm asking how to create a list like this]
| > >
| > > NEC PCI to USB Enhanced Host Controller (B1)
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 2)
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 6/1/2002
| > > NEC PCI to USB Open Host Controller
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 0)
| > > Discription: System reserved
| > > Bandwidth: 11%
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > NEC PCI to USB Open Host Controller
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 1)
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > USB Mass Storage Device
| > > Location: Location 0 (USB Zip 100)
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: USB Mass Storage Device
| > > Power Required: 498 mA
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > USB Root Hub
| > > Location: 0
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: 5 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > VIA Rev 5 or later USB Universal Host Controller
| > > Location: PCI bus 0, device 4,function 2
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > >
| > >
| > > jim
| >
| >
|
|
 
F

FrankV

I've used Aida32 also. It's a personal preference only.
Frank
Jim Macklin said:
Look at AIDA32 for the "best" and most complete, Google for
AIDA32



| I use it also. It's about the best I've seen. Easy to use
and read.
|
| | > Try typing "belarc" into your browser and download the
free version. It
| will
| > tell you everything that is in your computer.
| > | > > On other newsgroups I see people post hardware
configuration listings
| > > like the one below. How is this done? I can't find a
place in the
| > > device manager to create such a listing.
| > >
| > > [the following is an example I copied from a post. it
is not mine.
| > > i'm asking how to create a list like this]
| > >
| > > NEC PCI to USB Enhanced Host Controller (B1)
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 2)
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 6/1/2002
| > > NEC PCI to USB Open Host Controller
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 0)
| > > Discription: System reserved
| > > Bandwidth: 11%
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > NEC PCI to USB Open Host Controller
| > > Location: PCI Slot 6 (PCI bus 0, device 14,
function 1)
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > USB Mass Storage Device
| > > Location: Location 0 (USB Zip 100)
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: USB Mass Storage Device
| > > Power Required: 498 mA
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > USB Root Hub
| > > Location: 0
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: 2 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > > USB Root Hub
| > > Location: 0
| > > Discription: 5 port(s) available
| > > Power Required: 0 mA
| > > Driver Version: 5.1.2600.1106
| > > Driver Date: 7/1/2001
| > > VIA Rev 5 or later USB Universal Host Controller
| > > Location: PCI bus 0, device 4,function 2
| > > Discription: System reserved
| > > Bandwidth: 10%
| > > Driver Version: 5.1.2600.0
| > > Driver Date: 7/1/2001
| > >
| > >
| > > jim
| >
| >
|
|
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Vuescan 8.5.07 miscounts negatives and muffs offsets with Nikon LS-50 0
Is my system 48-bit LBA compatible? 3
USB Controller list in Device Manager 24
USB's Do Not Work 6
usb2 hardware but no usb2 function 3
DOS Error message 3
not a valid Win32 application 2
Windows XP unknown device-standard USB host controller 4

Top