XPe(SP2) EWF(RAM) settings

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

hi all!

my question is about "EWF Partition Size in KBytes" setting.

i have read that if ewf(ram), this value should be "0" because
ewf(ram) doesn't have ewf partition.

in case this value is, for example "1024", is ewf partition created?
or is ignored?

thanks in advance!
 
EWF Partition Size in KBytes is used when you have a Disk Overlay. You can
have both Disk and RAM overlays in a system. The EWF Partition Size in
KBytes is to set the parition size for the Disk Overlay, and if you are
using a Disk overlay it is a good idea to set it to something like 34000
which is the minimum. The settings needs to be 0 if you are only using RAM
or RAM REg Overlay.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
 
hi Sean!

thank you very much.

Sean Liming (eMVP) said:
EWF Partition Size in KBytes is used when you have a Disk Overlay. You can
have both Disk and RAM overlays in a system. The EWF Partition Size in
KBytes is to set the parition size for the Disk Overlay, and if you are
using a Disk overlay it is a good idea to set it to something like 34000
which is the minimum. The settings needs to be 0 if you are only using RAM
or RAM REg Overlay.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
Click to expand...
 
Back
Top