Windows Xp setup problem

[Guest]

iam using windows 98 se then iam want to install xp pro .. i did the clean
install by bootable xp cd

but in the installation process when it start the devices installtion the
problem with 34 minutes left happen to me and my pc always hanging

which support wrote about it here

http://support.microsoft.com/default.aspx?scid=kb;en-us;828267

iam check the file Pnplog.txt and find this written in it

[EnumeratedDevices]
PCI\VEN_12B9&DEV_1007&SUBSYS_00A612B9&REV_00\3&61aaa01&0&50=U.S. Robotics
56K Voice Win Int
PCI\VEN_1002&DEV_5046&SUBSYS_50461002&REV_00\4&415a68e&0&0008=RAGE 128 PRO
AGP 4X TMDS (Microsoft Corporation)
PCIIDE\IDEChannel\4&cb9060a&0&0=Primary IDE Channel
USB\ROOT_HUB\4&15736a3f&0=USB Root Hub
PCIIDE\IDEChannel\4&cb9060a&0&1=Secondary IDE Channel
ACPI\PNP0F13\4&2658d0a0&0=PS/2 Compatible Mouse
ACPI\PNP0000\4&2658d0a0&0=Programmable interrupt controller

so .. what should i do now to i can install xp wothout problems?

i was decided to run setup again with only cd driver and keybord mouse and
graphic card only attached to my motherboard

but now i found the graphic card RAGE 128 PRO in the Pnplog.txt file .. so
should i use other graphic card in the setup?

there are 7 items as u see

1- modem Robotics 56K Voice Win Int
2- graphic card RAGE 128 PRO AGP 4X TMDS
3- Primary IDE Channel
4- USB Root Hub
5- Secondary IDE Channel
6- PS/2 Compatible Mouse
7- Programmable interrupt controller

how should i do plz to complete the set up without problems

this is my computer informations:


Computer
Operating System Microsoft Windows 98 SE

Motherboard
CPU Type Intel Pentium IIIE, 800 MHz (6 x 133)
Motherboard Name Gigabyte GA-6BX7+ (1 ISA, 6 PCI, 1 AGP, 4 DIMM)
Motherboard Chipset Intel 82440BX
System Memory 512 MB (SDRAM)
BIOS Type Award Modular (07/06/00)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port Printer Port (LPT1)

Display
Video Adapter RAGE 128 Pro
3D Accelerator ATI Rage128 Pro
Monitor LG StudioWorks 520Si (100016843009)

Multimedia
Audio Adapter Creative SB Live! Sound Card

Storage
Disk Drive GENERIC IDE DISK TYPE46
Optical Drive CREATIVE CD5221E JJ990720 (52x CD-ROM)
Optical Drive HL-DT-ST CD-RW GCE-8523B (52x/24x/52x CD-RW)

Partitions
C: (FAT32) 9772 MB (8920 MB free)
D: (FAT32) 9772 MB (81 MB free)

Input
Keyboard Standard 101/102-Key or Microsoft Natural Keyboard
Mouse PS/2 Compatible Mouse Port

Peripherals
USB Device Generic USB Hub
USB Device SpeedTouch 330 ADSL Modem


plz tell me what i have to step by step and i will be very thanks to u

 

[marburg 494705]

Just a couple of thoughts. Before trying the installation, did you run the
compatibility checker that comes with Windows XP? It would show you exactly
which device is not compatible. Also, if you have a different video card,
I would remove the Rage card and try the installation with a different video
card. I had a similar situation with a Spacewalker mainboard and an ATI
Rage 128 Pro 4x AGP card. I put in a nvidia geforce card and had no
problems with the installation.

Marburg

iam using windows 98 se then iam want to install xp pro .. i did the clean
install by bootable xp cd

but in the installation process when it start the devices installtion the
problem with 34 minutes left happen to me and my pc always hanging

which support wrote about it here

http://support.microsoft.com/default.aspx?scid=kb;en-us;828267

iam check the file Pnplog.txt and find this written in it

[EnumeratedDevices]
PCI\VEN_12B9&DEV_1007&SUBSYS_00A612B9&REV_00\3&61aaa01&0&50=U.S. Robotics
56K Voice Win Int
PCI\VEN_1002&DEV_5046&SUBSYS_50461002&REV_00\4&415a68e&0&0008=RAGE 128 PRO
AGP 4X TMDS (Microsoft Corporation)
PCIIDE\IDEChannel\4&cb9060a&0&0=Primary IDE Channel
USB\ROOT_HUB\4&15736a3f&0=USB Root Hub
PCIIDE\IDEChannel\4&cb9060a&0&1=Secondary IDE Channel
ACPI\PNP0F13\4&2658d0a0&0=PS/2 Compatible Mouse
ACPI\PNP0000\4&2658d0a0&0=Programmable interrupt controller

so .. what should i do now to i can install xp wothout problems?

i was decided to run setup again with only cd driver and keybord mouse and
graphic card only attached to my motherboard

but now i found the graphic card RAGE 128 PRO in the Pnplog.txt file .. so
should i use other graphic card in the setup?

there are 7 items as u see

1- modem Robotics 56K Voice Win Int
2- graphic card RAGE 128 PRO AGP 4X TMDS
3- Primary IDE Channel
4- USB Root Hub
5- Secondary IDE Channel
6- PS/2 Compatible Mouse
7- Programmable interrupt controller

how should i do plz to complete the set up without problems

this is my computer informations:


Computer
Operating System Microsoft Windows 98 SE

Motherboard
CPU Type Intel Pentium IIIE, 800 MHz (6 x 133)
Motherboard Name Gigabyte GA-6BX7+ (1 ISA, 6 PCI, 1 AGP, 4 DIMM)
Motherboard Chipset Intel 82440BX
System Memory 512 MB (SDRAM)
BIOS Type Award Modular (07/06/00)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port Printer Port (LPT1)

Display
Video Adapter RAGE 128 Pro
3D Accelerator ATI Rage128 Pro
Monitor LG StudioWorks 520Si (100016843009)

Multimedia
Audio Adapter Creative SB Live! Sound Card

Storage
Disk Drive GENERIC IDE DISK TYPE46
Optical Drive CREATIVE CD5221E JJ990720 (52x CD-ROM)
Optical Drive HL-DT-ST CD-RW GCE-8523B (52x/24x/52x CD-RW)

Partitions
C: (FAT32) 9772 MB (8920 MB free)
D: (FAT32) 9772 MB (81 MB free)

Input
Keyboard Standard 101/102-Key or Microsoft Natural Keyboard
Mouse PS/2 Compatible Mouse Port

Peripherals
USB Device Generic USB Hub
USB Device SpeedTouch 330 ADSL Modem


plz tell me what i have to step by step and i will be very thanks to u