USB hub fails to install...

  • Thread starter Thread starter billjup
  • Start date Start date
B

billjup

I have tried adding 2 different USB hubs without success.
Both are recognized when attached, but XP wants to go
through the Add New Hardware wizard and asks for location
of driver files. These hubs don't have drivers and don't
require drivers. Both manuals instruct to cancel teh Add
Hardware wizard when prompted becasue they don't need any
drivers. One is a GE USB hub and the other is the new
Belkin high speed hub. Both are USB 2.0 and I have USB
2.0 ocntroller.

Both of these hubs are recognized and loaded without any
problem on another PC. I cancelled the Add Hardware
wizard as instructed by the hub manual.
 
I have the same problem with a Belkin Hub and also with
an Archos External Hard Drive.
If you get a reply I'd be more than grateful if you could
forward to my e-mail.
Many thanks

Alan
 
Have you installed WinXP Service Pack 1, which is needed to support USB
2.0??

steve
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

USB Hub Installation Failure 2
USB Root Hubs - Can't clear code 41 5
USB Hub not recognized 3
USB 2.0 Hub Problem 1
USB Hub Failed 10
Tried to connect USB HUB and lost USB comms 2
usb hub problem 1
USB root hubs 13

Back
Top