US Robotics modem not connecting thru MSN8

  • Thread starter Thread starter Carl
  • Start date Start date
C

Carl

I'm running Windows XP Pro and have a US Robotics external
V.92 modem connected to my PC. The modem is recognized in
the Device Manager, and I can dial out using
Hyperterminal. However, when I try to set up MSN8, the
modem doesn't dial out. I assume it's a COM port
conflict, but I'm not sure. The modem is set to use COM2,
and the device manager troubleshooter says there're no
conflicts, but I'm not sure what else it could be. Aside
from leaving the stone ages and getting cable internet,
what do I need to check?
 
The poblem sound like MSN8 is not configure to use the COM2 connected modem.
Check to see how MSN8 connection configuration is set up.

Y.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Different Modem, still not connecting well in XP 3
Robotics PC Card Modem 2
MODEM ERROR MESSAGE 633 1
Hyperterminal can connect to modem and dial but cannot connect to COM port and do AT commands 1
Modem card does NOT install 9
MultiTech vs US Robotics 4
Need help with a modem problem 4
IE7 conflict, dial up modem not recognized in bios or by hdw wizza 1

Back
Top