UMAX Powerlook/UTA Cable


S

Stefan

Dear all,
I got this very nice UMAX Powerlook I Scanner (PS-2400) and the UTA-II
transparency adaptor. What I don't have is the cable between the two units.
It's a 25pin DB to a 24pin centronics type. Does anybody has such a cable
and would sell it to me? Or, even better, does anybody have the wiring of
it or connector pin-outs? Then I could do it myself.
Any hints are more than welcome! Thank you very much, Stefan
 
Ad

Advertisements

C

CSM1

Stefan said:
Dear all,
I got this very nice UMAX Powerlook I Scanner (PS-2400) and the UTA-II
transparency adaptor. What I don't have is the cable between the two
units.
It's a 25pin DB to a 24pin centronics type. Does anybody has such a cable
and would sell it to me? Or, even better, does anybody have the wiring of
it or connector pin-outs? Then I could do it myself.
Any hints are more than welcome! Thank you very much, Stefan
Are you sure that it is not a standard Parallel Printer Cable.

The connector on the rear of the computer is 25 pin and the Printer is a 36
pin Centronics.

You can find just about any cable made here:
http://cablestogo.com/
 
Ad

Advertisements

S

Stefan

CSM1 said:
Are you sure that it is not a standard Parallel Printer Cable.

The connector on the rear of the computer is 25 pin and the Printer is a
36 pin Centronics.

You can find just about any cable made here:
http://cablestogo.com/
Hi,
thanks for your reply. Well, it's strange, but it's really a 24 pin
connector at the scanner which looks like a centronics printer port, except
that it is 24 pins.
//Stefan
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top