Specify network traffic for two LAN card

  • Thread starter Thread starter Alan - NoClone Author
  • Start date Start date
A

Alan - NoClone Author

Hi experts,

I have written an email sending Windows service but we want to use different
IP/LAN card/boardband service to send email, different from the IP of the
web server. Could we do that in programming level or server configuration?

Your help is appreciated.

Alan
http://noclone.net
 
What you need to do is modify the routing table. This search result may help,

Routing One router goes to the corporation email server and another one goes to the Internet Route command and examples Routing issue if the LAN and VPN are in ...
www.chicagotech.net/routing.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi experts,

I have written an email sending Windows service but we want to use different
IP/LAN card/boardband service to send email, different from the IP of the
web server. Could we do that in programming level or server configuration?

Your help is appreciated.

Alan
http://noclone.net
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

LAN-to-Web traffic uses customer's VPN connection 3
Network Security For 2009 2
Enabling the firewall inhibits any IP connectivity! 2
Lan Redundancy 3
LAN trouble--Red X 5
VPN take precedence over Lan-To-Web 3
XP networking problem after uninstalling F-Secure Internet Security 2006 suite 2
IE7 cannot display the web page 3

Back
Top