LAN-to-Web traffic uses customer's VPN connection

[John7]

Hi,


I service & monitor customer systems using the Windows VPN client in a
LAN-to-LAN situation. When the VPN connection is established and
I start IE it accesses the web through the customer VPN connection instead
of my own LAN to internet connection. IE is set to Never Dial a Connection.
I want all traffic initialy follow my local LAN-to-internet route. Only when
the IP-address matches the VPN range, traffic should go there.

I checked My Network Locations / Properties / Advanced / Advanced Settings
but there is no option to give local Lan-to-Web connections precedence over
VPN connections.

How to solve this problem?


TIA,
John7

 

[Bob Lin \(MS-MVP\)]

Sounds like routing issue. Posting the result of ipconfig /all on both
client and VPN server may help.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com

 

[John7]

I had to disable 'Use default gateway on remote network' in the Advanced
VPN-connection IP-properties.

John7

 

[Bob Lin \(MS-MVP\)]

Thank you for the update.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com