L
Leythos
I was at a clients location the other day and installed SBC DSL service
for them, it was a self install and they would not let us manually setup
the DSL Modem, said we had to use their software (what a crock).
The installer doesn't properly complete, which the tech already figured
would happen, and requires a reboot, where it completely changes your
Network Configuration settings and re-enables the firewall. It also
installs a IPViewer app.
After the last reboot the systems all BSOD's with an error pointing to
IPVNMON.SYS being the problem - I did a search online and found others
having this problem. Was able to boot in safe mode, remove the IPViewer
program, and the machines booted fine.
As a side note, the DSL modems don't default to bridge mode, you get a
public IP, but DNS (if you do dynamic) points to 192.168.0.1.... If you
get a competent support person they will tell you how to access the
Modem's advanced page and set it to bridge mode - this gives you a full
public connection. Yes, the system was protected using a firewall, so the
public connection was what we wanted.
This was just a warning about the SBC Self Install CD software and the
BSOD - that was the first BSOD I've seen in XP, ever.
for them, it was a self install and they would not let us manually setup
the DSL Modem, said we had to use their software (what a crock).
The installer doesn't properly complete, which the tech already figured
would happen, and requires a reboot, where it completely changes your
Network Configuration settings and re-enables the firewall. It also
installs a IPViewer app.
After the last reboot the systems all BSOD's with an error pointing to
IPVNMON.SYS being the problem - I did a search online and found others
having this problem. Was able to boot in safe mode, remove the IPViewer
program, and the machines booted fine.
As a side note, the DSL modems don't default to bridge mode, you get a
public IP, but DNS (if you do dynamic) points to 192.168.0.1.... If you
get a competent support person they will tell you how to access the
Modem's advanced page and set it to bridge mode - this gives you a full
public connection. Yes, the system was protected using a firewall, so the
public connection was what we wanted.
This was just a warning about the SBC Self Install CD software and the
BSOD - that was the first BSOD I've seen in XP, ever.