RRAS will not start

M

Mike

The RRAS service will not start. The following errors are
logged in event viewer:

Event 20152

The currently configured authentication provider failed to
load and initialize successfully. The specified procedure
could not be found.

Followed by:

Event 7024

The Routing and Remote Access service terminated with
service-specific error 127.

Has anyone experienced this problem?
 
C

Chetan Raghavendra [MSFT]

This is mostly to do with how one has configured RAS to
authenticate the clients. If the confugration says "RADIUS authentication"
and if the RADIUS server is unavailable, RRAS would fail to start.

You can check how it is configured by going to Run -> rrasmgmt.msc -> main
node -> right click, properties ->Security ->Authentication Provider. It
can be set to "Windows Authentication"

--
Thanks
Chetan
(e-mail address removed)

This posting is provided "AS IS" with no warranties, and confers no rights.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

rras service will not start 1
RRAS will not start with EventID 20152 7
RRAS won't start 1
Errors 20152 & 7024 on starting RRAS 0
RRas will not start 6
RRAS broken, Windows 2003 R2 64-bit 4
RRAS fails after upgrage to SBS2003 2
Cannot start IAS and RRAS 1

Top