RIS Boot Disk

  • Thread starter Jean-Francois Allard
  • Start date
J

Jean-Francois Allard

Hi,

I want to have a list of all compatible NIC's with the RIS
Boot Disk without installing RIS on a server.à

Thanks for your hlep!
 
R

RIShell

For problems with the Intel 100/1000 Adapters be SURE to check this
link out
http://www.intel.com/support/network/sb/cs-000023-prd38.htm

This article contains what proved to be 2 KEY pieces of information.
If your RIS server is 2003, there is a workaround for the e1000325.inf
or e100b325.inf files that is a must before anything will work right.
It involves working around an issue with the Microsoft parser. In
addition it follows up on getting rid of the "the image selected does
not contain drivers for your hardware." error messages.

Also, I've found the amount of references to "\i386" folders
disturbing while troubleshooting these RIS issues. There are only
about 8 or 9 different i386 folders available between the Pre-Ripreped
Client, and the RIS Server. Nobody seems to ever tell you which i386
folder they are referring to. I found that until the correct .ini and
..sys files were added to the base WindowsXP / 2000 image, I could not
get past the "the image selected does not contain drivers for your
hardware." error messages. And when I say "base" I do not mean the
image file that I was trying to load, I mean the base install of the
OS files that is created when configuring the RIS server. Yeah, that
base.

Patrick
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top