PXE Boot Blue Screen Error

[Guest]

Hi all,

Iwas trying to do Remote Boot using PXE. When i boot my client, loading
RAMDISK status is showing, every thing go file and after completeing loading
Blue screen was shown with Error Message STOP:0x0000007B (0xF789E584,
0xC0000034, 0x00000002, 0x00000000). kindly get me out of this issue.


with regards,
chezhian.

 

[KM]

chezhian,

Did you test your image on the hardware first? I mean you should go through FBA on a local disk there and then capture the image to
be able to Remote Boot it later on.

As to 7B error. It is probably the most popular BSOD on XPe. You can search this NG archive for lots of post about it. Or just look
for some tips here: http://msdn.microsoft.com/embedded/community/community/tips/xp/stoperr7b/default.aspx

 

[Guest]

KM,
The I had run FBA on local disk and FAB also completed successfully. iam
able to do local boot successfully.

Let me describe the steps i was following.

1.Run FBA on target machine.

2.Create an SDI disk of the 498 MB size using SDI loader utility.

3.Frmat the SDI virtual drive.(L: is my SDI drive

4.Copy entier run time image to SDI Volumeyour run-time image to the SDI
volume (ie to L

5. i created another SDI image using following command.
sdimgr /new F:\ramdisk.sdi
sdimgr F:\ramdisk.sdi /readpart:L:

6.Copy the SDI image to the \Program Files\Windows Embedded\Remote Boot
Service\Downloads folder of the server.

7 . My RBM configuration are:
Boot Program: startrom.n12
Boot Imahe : ramdisk.sdi
BootServer : 0.0.0.0
Use DHCP port (67)

Is there any special components added to the configuration file ?



with regards,
chezhian