Remote Boot PXE error

[Guest]

I am having a problem maybe someone can point me in the right direction.. I
created an image for my T5710 device. I am using the XPe sp2 eval kit. I
installed the remote boot services. DHCP is running on a different server.
On remote boot manager it defined the MAC, set it to boot, and the rom to
reboot (to start testing remote boot) I set it to use the DHCP port. In the
dhcp server I set the MAC of the device to pull a specific IP so I can make
sure the DHCP is responding properly. It does.. it pulls 192.168.215.1
After that I get a PXE starts and errors with:

E74 Bad or missing PXE menu and/or prompt information. PXE tags were
detected but the boot menu and/or boot prompt tags were not found/valid.

Has anyone encountered this and if so show me the way I can correct this
issue.

Thank you!

 

[Guest]

Well, I figure out my error.. It was on the DHCP server. Option 043
Embedded Vendor Specific Info must be disabled. So, since it is now on this
newsgroup it'll be here for anyone who encounters this error. Happy
Embedding!