PXE boot issue

P

pxe

Hello

I have my DHCP server on Windows 2003 Server SP1, PXE Server on
WinXPSP2 Spanish.
In my PXE Server a Client has got detected. I have a boot image which
is associated to this client. When I try to boot the Client, Then
Client is not getting the PXE image. It is displaying
DHCP MAC Address 00 90...blabla

DHCP....
as it failed to get the boot image it is going to next boot device
specified in BIOS boot order

Can any body suggest the solution for this.

Note: There are no fire walls setup in the network.
Network is connected using a simple switch

Thanks and Regards
babu
 
A

Adora Belle Dearheart

pxe said:
Hello

I have my DHCP server on Windows 2003 Server SP1, PXE Server on
WinXPSP2 Spanish.
In my PXE Server a Client has got detected. I have a boot image which
is associated to this client. When I try to boot the Client, Then
Client is not getting the PXE image. It is displaying
DHCP MAC Address 00 90...blabla

DHCP....
as it failed to get the boot image it is going to next boot device
specified in BIOS boot order

Can any body suggest the solution for this.

Note: There are no fire walls setup in the network.
Network is connected using a simple switch

Thanks and Regards
babu
Why not put the PXE server on the 2003? That's the way I've always had
it set up and it works fine.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top