0x0000007b (0xf79ba524, 0xc0000034, 0x00000000, 0x00000000) - USB

[Rajesh]

Hi,

I am trying to use a USB Key to boot Windows XP embedded.

I am using a Via Mini-ITX (LN Series) board and I have tried multiple USB
Flash Disks (Transcend V30, MoserBaer 2GB, Transcend StoreJet 2.5 with 120 GB
IDE HDD). All of them have the same problem.

That is while booting it gives "STOP: 0x0000007b (0xf79ba524, 0xc0000034,
0x00000000, 0x00000000)".

When I use a normal 80 GB Maxtor SATA Drive the same image boots
successfully. After that if I insert the USB Flash disk I am using, it also
get recognized in the booted O/s. But with the USB Flash Disk and same O/S
image I am not able to boot.

I have already ensured that while running the TAP.EXE on this system my USB
Flash disk is present.

I tried to boot the system in safe mode the list of drivers being loaded
goes till "disk.sys" and after that same blue screen message appears.

I also know that the similar queries have been posted multiple times by
different people on this and many other groups. I have first tried to go
through but, it did not helped me.

Any help will be appreciated.

Thanks

 

[Sean Liming \(MVP\)]

Do you have the USB Boot 2.0 component in the image?

http://www.seanliming.com/Docs/USB 2 Flash Boot.pdf

Is there a BIOS setting in the VIA system for emulting USB as a hard disk or
USB HDD setting?

--
Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit

 

[Rajesh]

Hi Sean,

I have gone through your posts.

I don't have USB Boot 2.0, I am just downloading Embedded Enabling Feature
Pack 2007. I guess after that I will have this component.

Via board does have options to boot using USB device and I have enabled it
also.

Thanks for the tip.

Will let you know once I am done with it.

Rajesh Thareja