Program stop

G

Guest

In the past few day I've been having programs stop responding in the middle
of my work or when I try to activae it. I wind up sending error reports
after error report to Microsoft or rebooting my system in order to get out
of it. I try ending the program in task manager, but sometimes that freezes
up too. Could someone shed some light as to why and what makes this happen.
I have not made any major changes to my computer in the last few months.
Help........frustrated.

Windows/xp home w/service pack2
Norton Internet Security 2005
 
M

Malke

Phil said:
In the past few day I've been having programs stop responding in the
middle
of my work or when I try to activae it. I wind up sending error
reports
after error report to Microsoft or rebooting my system in order to
get out
of it. I try ending the program in task manager, but sometimes that
freezes
up too. Could someone shed some light as to why and what makes this
happen. I have not made any major changes to my computer in the last
few months. Help........frustrated.

Windows/xp home w/service pack2
Norton Internet Security 2005

What does "programs stop" actually mean? If you mean that everything
locks up and you are sure your computer is 100% malware free (not just
virus-free), then you are probably having hardware failures. Here is a
link to help in checking for malware:

http://www.elephantboycomputers.com/page2.html#Removing_Malware

And here are general hardware troubleshooting steps:

1) Open the computer and run it open, cleaning out all dust bunnies and
observing all fans (overheating will cause system freezing). Obviously
you can't do this with a laptop, but you can hear if the fan is running
and feel if the laptop is getting too hot.

2) Test the RAM - I like Memtest86+ from www.memtest.org. Obviously, you
have to get the program from a working machine. You will either
download the precompiled Windows binary to make a bootable floppy or
the .iso to make a bootable cd. If you want to use the latter, you'll
need to have third-party burning software on the machine where you
download the file - XP's built-in burning capability won't do the job.
In either case, boot with the media you made. The test will run
immediately. Let the test run for an extended period of time - unless
errors are seen immediately. If you get any errors, replace the RAM.

3) Test the hard drive with a diagnostic utility from the mftr. Usually
you will download the file and make a bootable floppy with it. Boot
with the media and do a thorough test. If the drive has physical
errors, replace it.

4) The power supply may be going bad or be inadequate for the devices
you have in the system. The adequacy issue doesn't really apply to a
laptop, although of course the power
supply can be faulty.

5) Test the motherboard with something like TuffTest from
www.tufftest.com. Sometimes this is useful, and sometimes it isn't.

Testing hardware failures often involves swapping out suspected parts
with known-good parts. If you can't do the testing yourself and/or are
uncomfortable opening your computer, take the machine to a professional
computer repair shop (not your local equivalent of BigStoreUSA).

Malke
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top