New motherboard

[Ed Covney]

I just replaced a bad motherboard, but XP Pro only
boots so far before it - reboots.

Is there a way to get it to boot at least as to a point
where I can install all the proper MB device drivers .

TIA.

Ed

 

[Nepatsfan]

I just replaced a bad motherboard, but XP Pro only
boots so far before it - reboots.

Is there a way to get it to boot at least as to a point
where I can install all the proper MB device drivers .

TIA.

Ed

Try running a repair installation. Here are a couple of articles you may find
helpful.

Courtesy of Michael Stevens, MS-MVP
How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm

How to replace the motherboard on a computer that is running Windows Server
2003, Windows XP, or Windows 2000
http://support.microsoft.com/default.aspx?scid=kb;en-us;824125

Keep in mind that you should back up any important files before running this
procedure.

Good luck

Nepatsfan

 

[Ed Covney]

Try running a repair installation. Here are a couple of articles you may
find
helpful.

Courtesy of Michael Stevens, MS-MVP
How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm

That ref did the trick - thanks so, so much !!!

Ed