Network problem after repair install

[Guest]

After having updated my processor and motherboad, I had to do a repair
install of WinXP in order to get it to start up. Some problems arose since I
only had a CD with SP1, while SP2 was installed previously on the computer.

With the help of this forum, I made slipstream and with the new CD I could
do a repair install with SP2. Things now started working better, except...

Under the start menu, I dont get any network connections to edit or
activate. I managed to get online anyway using the "Remove Access Auto
Connection Manager" service, but I need to get the issue with the missing
network connections fixed.

Any suggestions on where to look or how to correct the problem?

 

[Guest]

"Staffan" skrev:

After having updated my processor and motherboad, I had to do a repair
install of WinXP in order to get it to start up. Some problems arose since I
only had a CD with SP1, while SP2 was installed previously on the computer.

With the help of this forum, I made slipstream and with the new CD I could
do a repair install with SP2. Things now started working better, except...

Under the start menu, I dont get any network connections to edit or
activate. I managed to get online anyway using the "Remove Access Auto
Connection Manager" service, but I need to get the issue with the missing
network connections fixed.

Any suggestions on where to look or how to correct the problem?

BTW, if I try to go via the control panel and then double-click the network
connection, the control panel hangs for a few minutes, then the network
connections is entered, but no connections are showing (not even the one to
my local network). Just an empty window. Since I am online right now, some
network connection must exist though!

 

[Guest]

After some troubleshooting, I can now supply some more information.

In the system log book, the following error from DCOM occurs :
"Servern {BA126AE5-2166-11D1-B1D0-00805FC1270E} registrerades inte med DCOM
inom erforderlig timeout.". In english that is something like "the server ...
wasnt registered using DCOM within the requested timeout".

I was also able to find an article, no 825826 (in swedish) about
troubleshooting when icons for network connections are missing. I followed
that article up to the point where it requests you to do "regsvr32
netshell.dll". That command fails with return code 0x80070005. The other
files (3 in total) work fine.

What should I do? I'll be thankful for all the help that I can get!

 

[Darrell Gorter[MSFT]]

Hello,
First here is the link in English
825826 How to troubleshoot missing network connections icons in Windows
Server
http://support.microsoft.com/?id=825826
The error code means the path is not accessible or it is getting an access
denied.
So you may not have access to the file or the registry entry to re-register
it.
Thanks,
Darrell Gorter[MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights
--------------------
<Thread-Topic: Network problem after repair install
<thread-index: AcXWi+cS2aFeDty9QB2QxmvcFgqb3w==
<X-WBNR-Posting-Host: 81.230.97.245
<From: "=?Utf-8?B?U3RhZmZhbg==?=" <[email protected]>
<References: <[email protected]>
<[email protected]>
<Subject: RE: Network problem after repair install
<Date: Fri, 21 Oct 2005 15:08:01 -0700
<Lines: 14
<Message-ID: <[email protected]>
<MIME-Version: 1.0
<Content-Type: text/plain;
< charset="Utf-8"
<Content-Transfer-Encoding: 7bit
<X-Newsreader: Microsoft CDO for Windows 2000
<Content-Class: urn:content-classes:message
<Importance: normal
<Priority: normal
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
<Newsgroups: microsoft.public.windowsxp.setup_deployment
<NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
<Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
<Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windowsxp.setup_deployment:36807
<X-Tomcat-NG: microsoft.public.windowsxp.setup_deployment
<
<After some troubleshooting, I can now supply some more information.
<
<In the system log book, the following error from DCOM occurs :
<"Servern {BA126AE5-2166-11D1-B1D0-00805FC1270E} registrerades inte med
DCOM
<inom erforderlig timeout.". In english that is something like "the server
...
<wasnt registered using DCOM within the requested timeout".
<
<I was also able to find an article, no 825826 (in swedish) about
<troubleshooting when icons for network connections are missing. I followed
<that article up to the point where it requests you to do "regsvr32
<netshell.dll". That command fails with return code 0x80070005. The other
<files (3 in total) work fine.
<
<What should I do? I'll be thankful for all the help that I can get!
<

 

[Guest]

Thank you for the info. What can I do to correct the problem?
/Staffan

""Darrell Gorter[MSFT]"" skrev:

 

[Guest]

Some further update: I found a neat little utility call RegMon, with which I
can se what key accesses gives access denied. Using that, and modifying key
access rights, I could complete the regsvr32 netshell.dll command.

The current situation is that although the situation is a bit better, there
are still access denied happening. A dump from RegMon is enclosed below
(lokal tjänst is local service in the swedish WinXP, the others you probably
understand).

These access problems cause windows to hang for half a minute or so after
start-up. That is really annoying. Please help in sorting this out!
Best Regards
/Staffan

60.57508469 svchost.exe:1384 OpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Cache ACCESS DENIED Access: 0xF NT INSTANS\LOKAL TJÄNST
60.57519531 svchost.exe:1384 OpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\5.0\Cache ACCESS DENIED Access: 0xF NT INSTANS\LOKAL TJÄNST
60.57531357 svchost.exe:1384 OpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\5.0\Cache ACCESS DENIED Access: 0xF NT INSTANS\LOKAL TJÄNST
60.58950424 svchost.exe:1384 OpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Cache ACCESS DENIED Access: 0xF NT INSTANS\LOKAL TJÄNST
66.41717529 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\MaxLineCloseTime ACCESS DENIED NT_AUTHORITY\SYSTEM
66.41725159 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\Device
Providers\{2172FD8F-11F6-11D3-90BF-006094EB630B}\APIVersion ACCESS
DENIED NT_AUTHORITY\SYSTEM
66.41727448 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\Device
Providers\{2172FD8F-11F6-11D3-90BF-006094EB630B}\DeviceIdPerfix ACCESS
DENIED NT_AUTHORITY\SYSTEM
66.41736603 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\Device
Providers\{2172FD8F-11F6-11D3-90BF-006094EB630B}\GUID ACCESS
DENIED NT_AUTHORITY\SYSTEM
66.41783905 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\Devices\UnassociatedExtensionData\Permanent Lineid ACCESS DENIED NT_AUTHORITY\SYSTEM
68.22280884 fxssvc.exe:1892 SetValue HKLM\Software\Microsoft\Fax\Devices\UnassociatedExtensionData\Permanent Lineid ACCESS DENIED NT_AUTHORITY\SYSTEM
73.07404327 alg.exe:2232 OpenKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\LOKAL TJÄNST
73.07412720 alg.exe:2232 CreateKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\LOKAL TJÄNST
73.07434845 alg.exe:2232 CreateKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\LOKAL TJÄNST
73.20452881 alg.exe:2232 OpenKey HKCR\CLSID\{FDD384CC-78C6-4E6D-8694-1DACBEE57F96} ACCESS DENIED Access: 0x20019 NT INSTANS\LOKAL TJÄNST
73.20466614 alg.exe:2232 OpenKey HKCR\CLSID\{FDD384CC-78C6-4E6D-8694-1DACBEE57F96} ACCESS DENIED Access: 0x20019 NT INSTANS\LOKAL TJÄNST
74.39426422 wmiprvse.exe:2412 OpenKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\NETWORK SERVICE
74.39432526 wmiprvse.exe:2412 CreateKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\NETWORK SERVICE
74.39450073 wmiprvse.exe:2412 CreateKey HKLM\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\Winmm ACCESS
DENIED Access: 0xF003F NT INSTANS\NETWORK SERVICE
74.43079376 wmiprvse.exe:2412 OpenKey HKCR\CLSID\{4590F811-1D3A-11D0-891F-00AA004B2E24} ACCESS DENIED Access: 0x20019 NT INSTANS\NETWORK SERVICE
140.35160828 regedit.exe:3784 OpenKey HKLM\SECURITY ACCESS DENIED Access:
0x9 BILBO\Staffan
140.41897583 regedit.exe:3784 OpenKey HKLM\SECURITY ACCESS DENIED Access:
0x9 BILBO\Staffan
359.53939819 regedit.exe:3784 OpenKey HKLM\SECURITY ACCESS DENIED Access:
0x9 BILBO\Staffan
397.33898926 regedit.exe:3784 OpenKey HKLM\SECURITY ACCESS DENIED Access:
0x9 BILBO\Staffan


"Staffan" skrev:

Thank you for the info. What can I do to correct the problem?
/Staffan

""Darrell Gorter[MSFT]"" skrev:

Hello,
First here is the link in English
825826 How to troubleshoot missing network connections icons in Windows
Server
http://support.microsoft.com/?id=825826
The error code means the path is not accessible or it is getting an access
denied.
So you may not have access to the file or the registry entry to re-register
it.
Thanks,
Darrell Gorter[MSFT]