Need Help With File Shareing On XP Home

G

Guest

Ok this is what going on ive ran the net work wizard many of times and still
none of the other computer cant acess my shared files i can get in to the
other compter shared files on the router but no one cant get in mine its
saying

//OEM is not accessible. You might not have permission to use this network
resource.Contact the adminstrator of this server to find out if you have the
access permissions.

Logon failure : the user has not granted the requested logon type at this
computer

Now is thier somehting i might over looked or somehting that isnt installed
on my computer now this isnt a factory built computer ive had this problem
from day 1 i got it built at the comptuershop and it took them a day to
figure out what was wrong with i had a crash and had to reinstall my OS and
now i have the file shareing problem again ive read and tried almost anything
but i think ive over looked soemthing some where so who can help me with this
 
G

Guest

it is tricky and very
tedious to resolve over
a newsgroup, at least that's
how i feel about it.

what i would suggest is
to use a third party program
called SimpleDesktop.

install simple desktop on both
computers, that is start with only
two machines and see if you
can network over the internet.

barring any gross misconfigurations
or faulty hardware, you should be
able to network over the internet and use
the simple desktop server as the network
home/workgroup for you to network
additional computers.

it should help get your
feet wet, whereas you can
begin sorting out your particular hardware
configuration for networking
without SimpleDesktop.

http://www.moogsoftware.com/pc remote control.html

--

db ·´¯`·.¸. said:
<)))º>·´¯`·.¸. , . .·´¯`·.. ><)))º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><)))º>


..
 
G

Guest

I get this same problem, quite often on my home network. I usually just
re-boot the router and it seems to re-set everything. Leave all your
computers on, turn off the router, unplug the router from its power source
but leave any other cables connected, with the router unplugged turn it back
on again to completely clear it (sounds silly but the lights will usually
flash on and off even with it's unplugged), turn it off again, plug it back
in, turn it on again, wait until the lights on the router return to their
normal state.
 
G

Guest

yea but i like to figure out what wrong with mine to fix it why is it doing
this or what do i need to install to get the fleshare to work over a lan
connection
 
G

Guest

sry but its not my router ive had my computer brought back to the shop only
cople day after i had it to get this fixed but years down the like i had a
major crash and had to reinstall my OS and now i have the same problem again
it must be something that is turned off or something that the windows xp home
OS
didnt come with but something must be out their to fix this problem
 
M

Malke

KillerDeath said:
Ok this is what going on ive ran the net work wizard many of times and still
none of the other computer cant acess my shared files i can get in to the
other compter shared files on the router but no one cant get in mine its
saying

//OEM is not accessible. You might not have permission to use this network
resource.Contact the adminstrator of this server to find out if you have the
access permissions.

Logon failure : the user has not granted the requested logon type at this
computer

Now is thier somehting i might over looked or somehting that isnt installed
on my computer now this isnt a factory built computer ive had this problem
from day 1 i got it built at the comptuershop and it took them a day to
figure out what was wrong with i had a crash and had to reinstall my OS and
now i have the file shareing problem again ive read and tried almost anything
but i think ive over looked soemthing some where so who can help me with this

There is no need to use a third-party program to fix your networking.
Please see these standard instructions:

Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall; or 2) inadvertently running two
firewalls such as the built-in Windows Firewall and a third-party
firewall; and/or 3) not having identical user accounts and passwords on
all Workgroup machines; 4) trying to create shares where the operating
system does not permit it.

Here are some general networking tips for home/small networks:

1. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

2. With earlier Microsoft operating systems, the name of the Workgroup
didn't matter. Apparently it does with Vista, so put all computers in
the same Workgroup. This is done from the System applet in Control
Panel, Computer Name tab.

3. Create identical user accounts and passwords on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

4. If one or more of the computers is XP Pro or Media Center:

a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.

b. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.

I think it is a good idea to create the identical user
accounts/passwords in any case when Vista machines are involved and it
isn't an onerous task with home/small networks.

5. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder.


Malke
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top