C1 and username:User with Passwordass
and printers (that is, LPT1: through LPT3. Type an asteriskLarry Samuels said:Net use
Connects a computer to or disconnects a computer from a shared resource, or
displays information about computer connections. The command also controls
persistent net connections. Used without parameters, net use retrieves a
list of network connections.
Syntax
net use [{DeviceName | *}] [\\ComputerName\ShareName[\volume]] [{Password |
*}]] [/user:[DomainName\]UserName] [/user:[DottedDomainName\]UserName]
[/user: [UserName@DottedDomainName] [/savecred] [/smartcard] [{/delete |
/persistent:{yes | no}}]
net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
Parameters
DeviceName
Assigns a name to connect to the resource or specifies the device to be
disconnected. There are two kinds of device names: disk drives (that is, D:
through Z
(*) instead of a specific device name to assign the next available device
name.
\\ComputerName\ShareName
Specifies the name of the server and the shared resource. If ComputerName
contains spaces, use quotation marks around the entire computer name from
the double backslash (\\) to the end of the computer name (for example,
"\\Computer Name\Share Name"). The computer name can be from 1 to 15
characters long.
\volume
Specifies a NetWare volume on the server. You must have Client Service for
NetWare installed and running to connect to NetWare servers.
Password
Specifies the password needed to access the shared resource. Type an
asterisk (*) to produce a prompt for the password. The password is not
displayed when you type it at the password prompt.
/user
Specifies a different user name with which the connection is made.
DomainName
Specifies another domain. If you omit DomainName, net use uses the current
logged on domain.
UserName
Specifies the user name with which to log on.
DottedDomainName
Specifies the fully-qualified domain name for the domain where the user
account exists.
/savecred
Stores the provided credentials for reuse.
/smartcard
Specifies the network connection is to use the credentials on a smart
card. If multiple smart cards are available, you are asked to specify the
credential.
/delete
Cancels the specified network connection. If you specify the connection
with an asterisk (*), all network connections are canceled.
/persistent:{yes | no}
Controls the use of persistent network connections. The default is the
setting used last. Deviceless connections are not persistent. Yes saves all
connections as they are made, and restores them at next logon. No does not
save the connection being made or subsequent connections. Existing
connections are restored at the next logon. Use /delete to remove persistent
connections.
/home
Connects a user to the home directory.
net help command
Displays help for the specified net command.
Remarks
a.. Connecting and disconnecting from a network resource
Use net use to connect to and disconnect from a network resource, and to
view your current connections to network resources. You cannot disconnect
from a shared directory if you use it as your current drive or an active
process is using it.
b.. Viewing connection information
To view information about a connection, you can do either of the
following:
a.. Type net use DeviceName to get information about a specific
connection.
b.. Type net use to get a list of all the computer's connections.
c.. Using deviceless connections
Deviceless connections are not persistent.
d.. Connecting to NetWare servers
After you install and run Client Service for NetWare, you can connect to a
NetWare server on a Novell network. Use the same syntax that you use to
connect to a Windows Networking server, except you must include the volume
you to which you want to connect.
e.. Using quotation marks
If the ServerName that you supply contains spaces, use quotation marks
around the text (that is, "Server Name"). If you omit quotation marks, an
error message appears.
Examples
To assign the disk-drive device name E: to the Letters shared directory on
the \\Financial server, type:
net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within
the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the
Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future
changes, type:
net use /persistent:yes
Formatting legend
Format Meaning
Italic Information that the user must supply
Bold Elements that the user must type exactly as shown
Ellipsis (...) Parameter that can be repeated several times in a
command line
Between brackets ([]) Optional items
Between braces ({}); choices separated by pipe (|). Example:
{even|odd} Set of choices from which the user must choose only one
Courier font Code or program output
--
Larry Samuels Associate Expert
MS-MVP (2001-2005)
Unofficial FAQ for Windows Server 2003 at
http://pelos.us/SERVER.htm
Expert Zone-
vintang99 said:Dear Experts,
What is the command for map network share
from Computer
by using "net use"
vintang99 said:Thank you very much for Larry's reply
but it is not what I need because I can
seach such syntax from microsoft website,
however I don't understand how to do.
Larry just copying the text from website
but can not solve my problem.
Larry Samuels said:Net use
Connects a computer to or disconnects a computer from a shared resource, or
displays information about computer connections. The command also controls
persistent net connections. Used without parameters, net use retrieves a
list of network connections.
Syntax
net use [{DeviceName | *}] [\\ComputerName\ShareName[\volume]] [{Password |
*}]] [/user:[DomainName\]UserName] [/user:[DottedDomainName\]UserName]
[/user: [UserName@DottedDomainName] [/savecred] [/smartcard] [{/delete |
/persistent:{yes | no}}]
net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
Parameters
DeviceName
Assigns a name to connect to the resource or specifies the device to be
disconnected. There are two kinds of device names: disk drives (that is, D:
through Z
(*) instead of a specific device name to assign the next available device
name.
\\ComputerName\ShareName
Specifies the name of the server and the shared resource. If ComputerName
contains spaces, use quotation marks around the entire computer name from
the double backslash (\\) to the end of the computer name (for example,
"\\Computer Name\Share Name"). The computer name can be from 1 to 15
characters long.
\volume
Specifies a NetWare volume on the server. You must have Client Service for
NetWare installed and running to connect to NetWare servers.
Password
Specifies the password needed to access the shared resource. Type an
asterisk (*) to produce a prompt for the password. The password is not
displayed when you type it at the password prompt.
/user
Specifies a different user name with which the connection is made.
DomainName
Specifies another domain. If you omit DomainName, net use uses the current
logged on domain.
UserName
Specifies the user name with which to log on.
DottedDomainName
Specifies the fully-qualified domain name for the domain where the user
account exists.
/savecred
Stores the provided credentials for reuse.
/smartcard
Specifies the network connection is to use the credentials on a smart
card. If multiple smart cards are available, you are asked to specify the
credential.
/delete
Cancels the specified network connection. If you specify the connection
with an asterisk (*), all network connections are canceled.
/persistent:{yes | no}
Controls the use of persistent network connections. The default is the
setting used last. Deviceless connections are not persistent. Yes saves all
connections as they are made, and restores them at next logon. No does not
save the connection being made or subsequent connections. Existing
connections are restored at the next logon. Use /delete to remove persistent
connections.
/home
Connects a user to the home directory.
net help command
Displays help for the specified net command.
Remarks
a.. Connecting and disconnecting from a network resource
Use net use to connect to and disconnect from a network resource, and to
view your current connections to network resources. You cannot disconnect
from a shared directory if you use it as your current drive or an active
process is using it.
b.. Viewing connection information
To view information about a connection, you can do either of the
following:
a.. Type net use DeviceName to get information about a specific
connection.
b.. Type net use to get a list of all the computer's connections.
c.. Using deviceless connections
Deviceless connections are not persistent.
d.. Connecting to NetWare servers
After you install and run Client Service for NetWare, you can connect to a
NetWare server on a Novell network. Use the same syntax that you use to
connect to a Windows Networking server, except you must include the volume
you to which you want to connect.
e.. Using quotation marks
If the ServerName that you supply contains spaces, use quotation marks
around the text (that is, "Server Name"). If you omit quotation marks, an
error message appears.
Examples
To assign the disk-drive device name E: to the Letters shared directory on
the \\Financial server, type:
net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within
the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the
Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future
changes, type:
net use /persistent:yes
Formatting legend
Format Meaning
Italic Information that the user must supply
Bold Elements that the user must type exactly as shown
Ellipsis (...) Parameter that can be repeated several times in a
command line
Between brackets ([]) Optional items
Between braces ({}); choices separated by pipe (|). Example:
{even|odd} Set of choices from which the user must choose only one
Courier font Code or program output
--
Larry Samuels Associate Expert
MS-MVP (2001-2005)
Unofficial FAQ for Windows Server 2003 at
http://pelos.us/SERVER.htm
Expert Zone-
vintang99 said:Dear Experts,
What is the command for map network share
from Computer
by using "net use"
c1\user1David Candy said:net use Y: \\serenity\C$ fieldsupp /user:serenity\fieldsupp
The command completed successfully.
Serenity is the computer, fieldsupp is both username and password.
--
--------------------------------------------------------------------------------------------------
How to lose a war in Iraq
http://webdiary.com.au/cms/?q=node/1335#comment-48641
=================================================
vintang99 said:Thank you very much for Larry's reply
but it is not what I need because I can
seach such syntax from microsoft website,
however I don't understand how to do.
Larry just copying the text from website
but can not solve my problem.
Larry Samuels said:Net use
Connects a computer to or disconnects a computer from a shared resource, or
displays information about computer connections. The command also controls
persistent net connections. Used without parameters, net use retrieves a
list of network connections.
Syntax
net use [{DeviceName | *}] [\\ComputerName\ShareName[\volume]] [{Password |
*}]] [/user:[DomainName\]UserName] [/user:[DottedDomainName\]UserName]
[/user: [UserName@DottedDomainName] [/savecred] [/smartcard] [{/delete |
/persistent:{yes | no}}]
net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
Parameters
DeviceName
Assigns a name to connect to the resource or specifies the device to be
disconnected. There are two kinds of device names: disk drives (that is, D:
through Z
(*) instead of a specific device name to assign the next available device
name.
\\ComputerName\ShareName
Specifies the name of the server and the shared resource. If ComputerName
contains spaces, use quotation marks around the entire computer name from
the double backslash (\\) to the end of the computer name (for example,
"\\Computer Name\Share Name"). The computer name can be from 1 to 15
characters long.
\volume
Specifies a NetWare volume on the server. You must have Client Service for
NetWare installed and running to connect to NetWare servers.
Password
Specifies the password needed to access the shared resource. Type an
asterisk (*) to produce a prompt for the password. The password is not
displayed when you type it at the password prompt.
/user
Specifies a different user name with which the connection is made.
DomainName
Specifies another domain. If you omit DomainName, net use uses the current
logged on domain.
UserName
Specifies the user name with which to log on.
DottedDomainName
Specifies the fully-qualified domain name for the domain where the user
account exists.
/savecred
Stores the provided credentials for reuse.
/smartcard
Specifies the network connection is to use the credentials on a smart
card. If multiple smart cards are available, you are asked to specify the
credential.
/delete
Cancels the specified network connection. If you specify the connection
with an asterisk (*), all network connections are canceled.
/persistent:{yes | no}
Controls the use of persistent network connections. The default is the
setting used last. Deviceless connections are not persistent. Yes saves all
connections as they are made, and restores them at next logon. No does not
save the connection being made or subsequent connections. Existing
connections are restored at the next logon. Use /delete to remove persistent
connections.
/home
Connects a user to the home directory.
net help command
Displays help for the specified net command.
Remarks
a.. Connecting and disconnecting from a network resource
Use net use to connect to and disconnect from a network resource, and to
view your current connections to network resources. You cannot disconnect
from a shared directory if you use it as your current drive or an active
process is using it.
b.. Viewing connection information
To view information about a connection, you can do either of the
following:
a.. Type net use DeviceName to get information about a specific
connection.
b.. Type net use to get a list of all the computer's connections.
c.. Using deviceless connections
Deviceless connections are not persistent.
d.. Connecting to NetWare servers
After you install and run Client Service for NetWare, you can connect to a
NetWare server on a Novell network. Use the same syntax that you use to
connect to a Windows Networking server, except you must include the volume
you to which you want to connect.
e.. Using quotation marks
If the ServerName that you supply contains spaces, use quotation marks
around the text (that is, "Server Name"). If you omit quotation marks, an
error message appears.
Examples
To assign the disk-drive device name E: to the Letters shared directory on
the \\Financial server, type:
net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within
the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the
Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future
changes, type:
net use /persistent:yes
Formatting legend
Format Meaning
Italic Information that the user must supply
Bold Elements that the user must type exactly as shown
Ellipsis (...) Parameter that can be repeated several times in a
command line
Between brackets ([]) Optional items
Between braces ({}); choices separated by pipe (|). Example:
{even|odd} Set of choices from which the user must choose only one
Courier font Code or program output
--
Larry Samuels Associate Expert
MS-MVP (2001-2005)
Unofficial FAQ for Windows Server 2003 at
http://pelos.us/SERVER.htm
Expert Zone-
Dear Experts,
What is the command for map network share
from Computer
by using "net use"
vintang99 said:Thanks David
Could anyone help me more,,
Computer name: pc1
shared folder name: abc
Permission :Only share for username: user1; password: sharing
I try the belowing command but fail and causing "system error 1219"
net use i: \\pc1\abc sharing /user
Pls help !!
====================================
David Candy said:net use Y: \\serenity\C$ fieldsupp /user:serenity\fieldsupp
The command completed successfully.
Serenity is the computer, fieldsupp is both username and password.
--
--------------------------------------------------------------------------------------------------
How to lose a war in Iraq
http://webdiary.com.au/cms/?q=node/1335#comment-48641
=================================================
vintang99 said:Thank you very much for Larry's reply
but it is not what I need because I can
seach such syntax from microsoft website,
however I don't understand how to do.
Larry just copying the text from website
but can not solve my problem.
:
Net use
Connects a computer to or disconnects a computer from a shared resource, or
displays information about computer connections. The command also controls
persistent net connections. Used without parameters, net use retrieves a
list of network connections.
Syntax
net use [{DeviceName | *}] [\\ComputerName\ShareName[\volume]] [{Password |
*}]] [/user:[DomainName\]UserName] [/user:[DottedDomainName\]UserName]
[/user: [UserName@DottedDomainName] [/savecred] [/smartcard] [{/delete |
/persistent:{yes | no}}]
net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
Parameters
DeviceName
Assigns a name to connect to the resource or specifies the device to be
disconnected. There are two kinds of device names: disk drives (that is, D:
through Z
(*) instead of a specific device name to assign the next available device
name.
\\ComputerName\ShareName
Specifies the name of the server and the shared resource. If ComputerName
contains spaces, use quotation marks around the entire computer name from
the double backslash (\\) to the end of the computer name (for example,
"\\Computer Name\Share Name"). The computer name can be from 1 to 15
characters long.
\volume
Specifies a NetWare volume on the server. You must have Client Service for
NetWare installed and running to connect to NetWare servers.
Password
Specifies the password needed to access the shared resource. Type an
asterisk (*) to produce a prompt for the password. The password is not
displayed when you type it at the password prompt.
/user
Specifies a different user name with which the connection is made.
DomainName
Specifies another domain. If you omit DomainName, net use uses the current
logged on domain.
UserName
Specifies the user name with which to log on.
DottedDomainName
Specifies the fully-qualified domain name for the domain where the user
account exists.
/savecred
Stores the provided credentials for reuse.
/smartcard
Specifies the network connection is to use the credentials on a smart
card. If multiple smart cards are available, you are asked to specify the
credential.
/delete
Cancels the specified network connection. If you specify the connection
with an asterisk (*), all network connections are canceled.
/persistent:{yes | no}
Controls the use of persistent network connections. The default is the
setting used last. Deviceless connections are not persistent. Yes saves all
connections as they are made, and restores them at next logon. No does not
save the connection being made or subsequent connections. Existing
connections are restored at the next logon. Use /delete to remove persistent
connections.
/home
Connects a user to the home directory.
net help command
Displays help for the specified net command.
Remarks
a.. Connecting and disconnecting from a network resource
Use net use to connect to and disconnect from a network resource, and to
view your current connections to network resources. You cannot disconnect
from a shared directory if you use it as your current drive or an active
process is using it.
b.. Viewing connection information
To view information about a connection, you can do either of the
following:
a.. Type net use DeviceName to get information about a specific
connection.
b.. Type net use to get a list of all the computer's connections.
c.. Using deviceless connections
Deviceless connections are not persistent.
d.. Connecting to NetWare servers
After you install and run Client Service for NetWare, you can connect to a
NetWare server on a Novell network. Use the same syntax that you use to
connect to a Windows Networking server, except you must include the volume
you to which you want to connect.
e.. Using quotation marks
If the ServerName that you supply contains spaces, use quotation marks
around the text (that is, "Server Name"). If you omit quotation marks, an
error message appears.
Examples
To assign the disk-drive device name E: to the Letters shared directory on
the \\Financial server, type:
net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within
the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the
Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future
changes, type:
net use /persistent:yes
Formatting legend
Format Meaning
Italic Information that the user must supply
Bold Elements that the user must type exactly as shown
Ellipsis (...) Parameter that can be repeated several times in a
command line
Between brackets ([]) Optional items
Between braces ({}); choices separated by pipe (|). Example:
{even|odd} Set of choices from which the user must choose only one
Courier font Code or program output
--
Larry Samuels Associate Expert
MS-MVP (2001-2005)
Unofficial FAQ for Windows Server 2003 at
http://pelos.us/SERVER.htm
Expert Zone-
Dear Experts,
What is the command for map network share
from Computer
by using "net use"