R
Richard
Running Windows XP SP2. Broad- band modem always on, Linksys router.
Current on updates. Passes all virus, trojans, malware, etc. checks.
About a week ago, following a reboot, my computer does not automatically
hook up to my local area connection - no email, no FTP, no browsing, no
connection at all. Using the regular IP repair, ipconfig /release, ipconfig
/renew, netsh winsock reset, etc. - nothing accomplishes a repair or
connection.
Using Network Diagnostics for Windows XP results (in about four or five
minutes) results in a successful repair.
Another method of repair:
Control panel > Network Connections and clicking on Local Area Connection
status indicates "Connected" - except that I'm not connected. Clicking on
"Repair Connection" - no repair.
However, clicking on "Disable this network device" and then after waiting
for the disconnect status to appear, and then clicking on "Enable this
network device" - then wait. Suddenly I'm connected. Everything works
great until the next time I turn the computer off and reboot. (Sometime
necessary after updates.)
I would like to simplify my repair process. What are the command line
programs to accomplish these two operations?
So my question - to speed up this "work-around" what are the command line
programs to do these two functions? What is the name of the "Disable...."
program, and what is the name of the "Enable..." program . I've looked
under Windows folder and System 32 folder, and can't find anything likely.
Many of the name of the command line programs do not give a clue as to what
they really do.
Any help would be greatly appreciated.
Current on updates. Passes all virus, trojans, malware, etc. checks.
About a week ago, following a reboot, my computer does not automatically
hook up to my local area connection - no email, no FTP, no browsing, no
connection at all. Using the regular IP repair, ipconfig /release, ipconfig
/renew, netsh winsock reset, etc. - nothing accomplishes a repair or
connection.
Using Network Diagnostics for Windows XP results (in about four or five
minutes) results in a successful repair.
Another method of repair:
Control panel > Network Connections and clicking on Local Area Connection
status indicates "Connected" - except that I'm not connected. Clicking on
"Repair Connection" - no repair.
However, clicking on "Disable this network device" and then after waiting
for the disconnect status to appear, and then clicking on "Enable this
network device" - then wait. Suddenly I'm connected. Everything works
great until the next time I turn the computer off and reboot. (Sometime
necessary after updates.)
I would like to simplify my repair process. What are the command line
programs to accomplish these two operations?
So my question - to speed up this "work-around" what are the command line
programs to do these two functions? What is the name of the "Disable...."
program, and what is the name of the "Enable..." program . I've looked
under Windows folder and System 32 folder, and can't find anything likely.
Many of the name of the command line programs do not give a clue as to what
they really do.
Any help would be greatly appreciated.