lexmark x75 printer trouble.

G

Guest

Hi there. I am trying to install my lexmark x75 all in one printer to my xp
computer, but every time i try and install the drivers for it it comes up
with an error mesasage saying " the file system is not suitable for running
MS-DOS and microsoft windows applications. chose close to terminate the
application." At the top of the message it say 16 bit windows subsystem. ANY
help would be greatly recieved!!
 
G

Guest

hi there, i have tryed the latext driver from the lexmark site, but will not
allow me to install the criver. It come up with the 16 bit windows sub system
box saying, This program is not suitable for running in MS DOS and windows
applications.
 
C

Cari \(MS-MVP\)

Run a System File Check..... from the Command Prompt, type

sfc /scannow

(note the space between the c and the /)

This will check the system files on the PC and replace any that may be
corrupted. After it finishes, reboot the PC and try the printer
installation again.
 
G

Guest

Same problem I am having .Did you try and load windows xp
service pack 2? If so thats where your problem lies.
Microsoft is working on it at least from what I have been
told.

Good luck

Tom
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top