Apparently, you selected the "New Installation" option and did not
select the default "Upgrade" option. The only way to correct this
problem is to delete all partitions and start over:
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except for you mouse and keyboard, before installing XP.
1. Open your BIOS and set your CD Drive as the first bootable device.
===> Accessing Motherboard BIOS
===>
http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
7. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
--------------------------------------------------------------------------------------------------------------
-------------
| I have a Sony Viao laptop F650, with a 10 Gb HD that was originally partitioned. I would like to have the
disk without any partitions, but when I upgraded from Win ME to Win XP (new installation choice), the HD was
again partitioned. How do I install Win XP with only a single partition?
