G
Guest
I bought new comp parts recently and well everything super fine except that random stop error occuring (turned auto rebooting off)
it's getting really annoying
here's the error message I get :
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow there steps:
Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for faulty or mismatched memory. Try changing Video Adapters.
Disable or removeany newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
***STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
Well... I've ran a memory check and it found no error and it cannot be heat as well since cpu temperature is always low in the 30s celicus same for motherboard...
This stop error occurs randomly about 2 times a day =\ it's really annoying
Help would be appreciated! thanks!
it's getting really annoying
here's the error message I get :
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow there steps:
Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for faulty or mismatched memory. Try changing Video Adapters.
Disable or removeany newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
***STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
Well... I've ran a memory check and it found no error and it cannot be heat as well since cpu temperature is always low in the 30s celicus same for motherboard...
This stop error occurs randomly about 2 times a day =\ it's really annoying
Help would be appreciated! thanks!