Harddisk enclosure undetectable

C

crapit

I have a combo USB/Firewire H/Disk enclosure. Using the USB interface, the
My Computer is able to detect the Mass Storage. However, when I use
Firewire, no Mass Storage detected.

The Device Manager show the NEC OHCI IEEE 1934 Controller working. What is
wrong?
 
T

Thagor

I have a combo USB/Firewire H/Disk enclosure. Using the USB interface,
the My Computer is able to detect the Mass Storage. However, when I
use Firewire, no Mass Storage detected.

The Device Manager show the NEC OHCI IEEE 1934 Controller working.
What is wrong?
1. Check the firewire controller for updated drivers.
2. Check the firewire cable with a known good device.
3. Substitute the enclosure with a known good firewire device.
 
C

crapit

It use to work! I only have 1 firewire device!
Thagor said:
1. Check the firewire controller for updated drivers.
2. Check the firewire cable with a known good device.
3. Substitute the enclosure with a known good firewire device.
 
Õ

õxßÕ

Remove the drivers.
Reboot PC.
If it doesn't detect new hardware then you got other problems, otherwise
install it again.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top