A
Arpit
HI All
This is arpit.
This is my System Information
"Windows XP Pro
System Type X86-based PC
Processor x86 Family 6 Model 6 Stepping 3 CentaurHauls ~824 Mhz
BIOS Version/Date American Megatrends Inc. 62710, 5/20/1999
SMBIOS Version 2.3
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\System32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "5.1.2600.0
(xpclient.010817-1148)"
Total Physical Memory 128.00 MB
Available Physical Memory 23.06 MB
Total Virtual Memory 434.12 MB
Available Virtual Memory 234.07 MB
Page File Space 307.70 MB
Page File D:\pagefile.sys "
My PC suddenly crashes and generates several types on error on several
occasions which are as follows:
1. Most of the time it does not boot again immediately or within 10
minutes after crash and after one hour or so it is boots again
normally.
2.Whenever it does boot again normally my winxp flashes a windows
saying "Your system has recovered from a serious error"
3.Sometimes after an hour or so after the system crashes it tries to
boot again and then it calculates the NVRAM and then flashes a message
that CMOS settings error ".Press F1 to enter SETUP" "Press F2 to load
optimal settings and continue.
whenver i change the CMOS settings and exit it does not proceed furter
but hangs and also by pressing F2.
Now tell me whether it is a hardware error or a software error or a
BIOS needed upgradation.
Plese be elaborate.
Thnks
This is arpit.
This is my System Information
"Windows XP Pro
System Type X86-based PC
Processor x86 Family 6 Model 6 Stepping 3 CentaurHauls ~824 Mhz
BIOS Version/Date American Megatrends Inc. 62710, 5/20/1999
SMBIOS Version 2.3
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\System32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "5.1.2600.0
(xpclient.010817-1148)"
Total Physical Memory 128.00 MB
Available Physical Memory 23.06 MB
Total Virtual Memory 434.12 MB
Available Virtual Memory 234.07 MB
Page File Space 307.70 MB
Page File D:\pagefile.sys "
My PC suddenly crashes and generates several types on error on several
occasions which are as follows:
1. Most of the time it does not boot again immediately or within 10
minutes after crash and after one hour or so it is boots again
normally.
2.Whenever it does boot again normally my winxp flashes a windows
saying "Your system has recovered from a serious error"
3.Sometimes after an hour or so after the system crashes it tries to
boot again and then it calculates the NVRAM and then flashes a message
that CMOS settings error ".Press F1 to enter SETUP" "Press F2 to load
optimal settings and continue.
whenver i change the CMOS settings and exit it does not proceed furter
but hangs and also by pressing F2.
Now tell me whether it is a hardware error or a software error or a
BIOS needed upgradation.
Plese be elaborate.
Thnks