EWF Overlay on second disk drive

A

a72049

I have device with two disk drives. Drive 1 has XPe, application and
data which I want to use EWF. Disk drive 2 has one partition with data
which I also want to use EWF. How to put EWF Overlay on disk drive 2
in the unpartitioned space of disk drive 2?

Thank you much.
 
A

Anson

In EWF component you can specify the number of protected volumes you
want. By default it is set to 1. Change it to 2 and you can configure
EWF to protect both of your drives. You can have up to maximum of 9
protected volumes.
 
A

Anson

In EWF component you can specify the number of protected volumes you
want. By default it is set to 1. Change it to 2 and you can configure
EWF to protect both of your drives. You can have up to maximum of 9
protected volumes.

Anson
DST Asia Pte Ltd
www.dst-asia.com
www.wecomasia.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

EWF overlay on a second HDD 2
Deploying dual boot XPe C:\ partitions on target with disk overlay EWF 3
Protecting fixed CF with disk resident EWF overlay 9
EWF RAM problem 2
FP2007 EWF Ram Registry 2
Problem of Ewf ( Disk Type )!! Please help, MS. 4
Problem with RAM Reg 1
BSOD 0x8E after reboot in EWF DISK MODE 2

Top